WelcomeEnterpriseSmall BusinessHome & Home OfficePartnersAbout Symantec
SYM09-004
17 March 2009
Symantec Products Update Vulnerable Autonomy KeyView Module

Revision History
None

Severity
High
Low for SMS for SMTP and SMS Appliance

NOTE: SMS for SMTP and BrightMail Appliance run the Autonomy KeyView module out-of- process with limited privileges reducing the impact of this issue

Remote AccessYes
Local AccessNo
Authentication RequiredNo
Exploit publicly availableNo

Overview
Symantec products that ship and use a third-party Autonomy KeyView module have updated the module to address a buffer overflow vulnerability reported against the KeyView module.

Affected Products
ProductVersionBuildSolution(s)
Symantec Mail Security for Domino7.5.5.32
7.5.4.29
7.5.3.25
All7.5.6
Symantec Mail Security for Microsoft Exchange5.0.11
5.0.10
All5.0.12
Symantec Mail Security for Microsoft Exchange6.0.7
6.0.6
All6.0.8
Symantec Mail Security for SMTP5.0.xAllApply Patch Level 201
Symantec Mail Security Appliance/ Symantec BrightMail Appliance5.0.x and laterAllUpgrade to Bright Mail Appliance 8.0.0
Symantec BrightMail Appliance AllUpgrade to Bright Mail Appliance 8.0.0
Symantec Data Loss Prevention Detection Servers/Enforce7.xAllHotfix_7.2.0.37
Symantec Data Loss Prevention Detection Servers/Enforce8.0AllHotfix_8.0.10.38_1
Symantec Data Loss Prevention Endpoint Agents8.0AllHotfix_8.0.10.38_2
Symantec Data Loss Prevention Detection Servers/Enforce for Windows8.1.xAllHotfix_8.1.5.15_Windows
Symantec Data Loss Prevention Detection Servers/Enforce for Linux8.1.xAllHotfix_8.1.5.15_Linux
Symantec Data Loss Prevention Endpoint Agents8.1.xAllHotfix_8.1.6.2

Note:

Symantec DLP 7.x Detection Servers and Enforce are affected. DLP 7.x Endpoint Agents are NOT affected.

Symantec DLP customers that need to update Symantec DLP 8.1 Detection Servers, Enforce, or Endpoint Agents MUST first update to Symantec DLP v8.1.1.

Following application of the v8.1.1 upgrade apply the Symantec DLP 8.1.x hotfixes identified above.

Products Not Affected
ProductVersion
Symantec Mail Security for DominoAll versions prior to 7.5.3
Symantec Mail Security for Microsoft ExchangeAll versions prior to 5.0.10
Symantec Mail Security for Microsoft ExchangeAll 6.0.x versions prior to 6.0.6
Symantec Mail Security for SMTP4.1
Symantec Mail Security Appliance4.x
Symantec BrightMail Appliance8.x
Symantec Data Loss Prevention Endpoint Agents7.x
Symantec Data Loss Prevention Detection Servers/Enforce9.0

Details
iDefense Labs notified Symantec of a buffer overflow vulnerability reported against the Autonomy KeyView module shipped and installed by Symantec products identified above.

Symantec Response
Symantec product engineers have implemented updates for this issue in all affected product versions.

In the Symantec Mail Security for SMTP and Symantec Mail Security/BrightMail Gateway Appliances, the Autonomy KeyView module processes are separated from the Symantec application processes (out-of-process) and have limited rights. This out-of-process method specifically addresses these types of security concerns. Any attempt to exploit the Autonomy KeyView module results in process termination of the offending thread and an error message generated to and handled by the specific application.

Symantec knows of no exploitation of or adverse customer impact from these issues.

Update Information

Updates will be available from your normal support/download locations.

SMS for Domino and Microsoft Exchange updates are available through the Platinum Support Web Site for Platinum customers or through the FileConnect -Electronic Software Distribution web site.

Symantec DLP updates are available for download through secure file exchange.

Mitigation/Workaround

Temporary Workaround for Symantec Mail Security for Domino
Installations of SMS for Domino 7.5 that do not utilize the Content Filtering capabilities of the product are not susceptible to this issue. SMS for Domino 7.5 would be susceptible only if the attachment content scanning option is enabled.

As an interim workaround, administrators unable to upgrade to the recommended solution may disable content filtering rules that contain parameters that specify scanning of attachment content. The rules do not need to be deleted, only disabled until the updated release is installed.

To disable the content filtering rules for Symantec Mail Security for Domino

  • Select the "Content Filtering" tab to display the list of current enabled rules
  • Click on the checkmark to the left of any rules that utilize attachment content filtering, changing it to a red "X", and disabling the rule

Temporary Workaround for Symantec Mail Security for Microsoft Exchange
Installations of SMS for Microsoft Exchange 5.x that do not utilize the Content Filtering capabilities of the product are not susceptible. SMS for Microsoft Exchange 5.x is susceptible only if the attachment content scanning option is enabled.

As an interim workaround, administrators unable to upgrade to the recommended solution may disable content filtering rules that contain parameters that specify scanning of attachment content. The rules do not need to be deleted, only disabled until the updated release is installed.
  • To disable the content filtering rules for SMS for Microsoft Exchange:
  • Select the "Policies" tab and then choose "Content Filtering" to display the list of currently enabled rules
  • Ensure that all rules using attachment content are "disabled"

Temporary Workaround for Symantec Mail Security for SMTP and Symantec Mail Security Appliance
Risk from this vulnerability is limited on installations of SMS for SMTP and SMS Appliance in which the attachment content scanning option is enabled. However, installations that do not utilize the Content Filtering capabilities of the product are not susceptible to this issue.

As an interim workaround, administrators unable to upgrade to the recommended solution may disable content filtering rules that contain parameters that specify scanning of attachment content. The rules do not need to be deleted, only disabled until the updated release is installed.

To disable the content filtering rules for SMS for SMTP and SMS Appliance:
  • Log into the Management Console and select the Settings tab
  • Select Scanning from the Email Scanning group in the Navigation List
  • To disable, uncheck the option "Enable searching of non-plain text attachments for words in dictionaries"

Temporary Workaround for Symantec Data Loss Prevention Suite

Symantec DLP 7.x and v8.x Servers:
  • Edit Vontu/Protect/lib/native/formats.ini

  • Locate the entry "178=wp6" under the [Formats] section

  • Replace with ";178=wp6".

  • Restart all DLP services.

Symantec DLP 8.x Endpoint Agents:
  • Edit <Installation Root>\Agent\Verity\formats.ini

  • Locate the entry "178=wp6" under the [Formats] section

  • Replace with ";178=wp6".

  • Restart all DLP services.

Best Practices

As part of normal best practices, Symantec strongly recommends:

  • Restrict access to administration or management systems to privileged users.
  • Restrict remote access, if required, to trusted/authorized systems only.
  • Run under the principle of least privilege where possible to limit the impact of exploit by threats.
  • Keep all operating systems and applications updated with the latest vendor patches.
  • Follow a multi-layered approach to security. Run both firewall and anti-malware applications, at a minimum, to provide multiple points of detection and protection to both inbound and outbound threats.
  • Deploy network and host-based intrusion detection systems to monitor network traffic for signs of anomalous or suspicious activity. This may aid in detection of attacks or malicious activity related to exploitation of latent vulnerabilities

Credit
This vulnerability was reported by an iDefense contributor who wishes to remain anonymous.

References

Security Focus, http://www.securityfocus.com, has assigned a Bugtraq ID (BID) 34086 to this issue for inclusion in the Security Focus vulnerability database.

This issue is a candidate for inclusion in the Common Vulnerabilities and Exposures (CVE) list (http://cve.mitre.org), which standardizes names for security problems. The CVE initiative has assigned CVE-2008-4564 to this issue.


Symantec takes the security and proper functionality of our products very seriously. As founding members of the Organization for Internet Safety (OISafety), Symantec supports and follows the principles of responsible disclosure. Symantec also subscribes to the vulnerability disclosure guidelines outlined by the National Infrastructure Advisory Council (NIAC).

Please contact secure@symantec.com if you feel you have discovered a security issue in a Symantec product. A Symantec Product Security team member will contact you regarding your submission. Symantec strongly recommends using encrypted email for reporting vulnerability information to secure@symantec.com. The Symantec Product Security PGP key can be found at the end of this message.

Symantec has developed a Product Vulnerability Response document outlining the process we follow in addressing suspected vulnerabilities in our products. This document is available below.

Symantec-Product-Vulnerability-Response Symantec Vulnerability Response Policy Symantec Product Vulnerability Management PGP Key Symantec Product Vulnerability Management PGP Key


Copyright (c) 2009 by Symantec Corp.
Permission to redistribute this alert electronically is granted as long as it is not edited in any way unless authorized by Symantec Security Response. Reprinting the whole or part of this alert in any medium other than electronically requires permission from secure@symantec.com.

Disclaimer
The information in the advisory is believed to be accurate at the time of publishing based on currently available information. Use of the information constitutes acceptance for use in an AS IS condition. There are no warranties with regard to this information. Neither the author nor the publisher accepts any liability for any direct, indirect, or consequential loss or damage arising from use of, or reliance on, this information.

Symantec, Symantec products, Symantec Security Response, and secure@symantec.com are registered trademarks of Symantec Corp. and/or affiliated companies in the United States and other countries. All other registered and unregistered trademarks represented in this document are the sole property of their respective companies/owners.


Last modified on: Tuesday, 17-Mar-09 14:34:36