- Change Language
Dynamic Multi-Pathing
How To
-
Cleaning up the operating system device tree after removing LUNs
Doc. ID: HOWTO74768 | 2012-03-26 -
Extending an LVM rootvg when dmp_native_support is off
Doc. ID: HOWTO74870 | 2012-03-27 -
Displaying paths controlled by a DMP node, controller, enclosure, or array port
Doc. ID: HOWTO74711 | 2012-03-26 -
Replacing a host bus adapter online on a server managed by DMP
Doc. ID: HOWTO74825 | 2012-03-27 -
DMP in the Virtual I/O server overview
Doc. ID: HOWTO74846 | 2012-03-27 -
Using DMP with LVM boot disks
Doc. ID: HOWTO74873 | 2012-03-27 -
Cloning a LVM rootvg that is enabled for DMP
Doc. ID: HOWTO74866 | 2012-03-27 -
Using mksysb when the root volume group is under DMP control
Doc. ID: HOWTO74868 | 2012-03-27 -
Migrating to DMP from IBM Multipath IO (MPIO)
Doc. ID: HOWTO74828 | 2012-03-27 -
Example: migration from PowerPath to DMP on Virtual I/O Server for a dual-VIOS configuration
Doc. ID: HOWTO74861 | 2012-03-27 -
Example: migration from MPIO to DMP on Virtual I/O Server for a dual-VIOS configuration
Doc. ID: HOWTO74850 | 2012-03-27 -
Migrating to DMP from IBM SDD (vpath)
Doc. ID: HOWTO74832 | 2012-03-27 -
Migrating an internal root disk to a SAN root disk under DMP control
Doc. ID: HOWTO74815 | 2012-03-27 -
About online dynamic reconfiguration
Doc. ID: HOWTO74742 | 2012-03-26 -
Cleaning up the operating system device tree after removing LUNs
Doc. ID: HOWTO74739 | 2012-03-26 -
Changing the characteristics of a LUN from the array side
Doc. ID: HOWTO74859 | 2012-03-27 -
Exporting a Logical Volume from VIOS as a virtual SCSI disk to the VIO client when DMP is managing the devices in the VIOS
Doc. ID: HOWTO74854 | 2012-03-27 -
Migrating to DMP from EMC PowerPath
Doc. ID: HOWTO74830 | 2012-03-27 -
VxVM coexistence with ZFS
Doc. ID: HOWTO74741 | 2012-03-26 -
Migrating a SAN root disk from MPIO to DMP control
Doc. ID: HOWTO74813 | 2012-03-27