Most Popular | Most Recent
Version : Environment :
DOCUMENTATION AND DOWNLOAD: How to use the NetBackup Catalog Consistency "Repair" Utility (NBCCR) 126.96.36.199.
Doc. ID: TECH67838 | 2013-10-24
How to install the NetBackup Tape Device Driver for Windows NT/2000/2003
Doc. ID: TECH38223 | 2013-10-23
DOCUMENTATION: How to enable logging to troubleshoot VERITAS NetBackup (tm) for SAP backups on Windows
Doc. ID: TECH32032 | 2013-10-23
DOCUMENTATION: How to disable the Client Job Tracker on a NetBackup client
Doc. ID: TECH31484 | 2013-10-24
How to perform a True Image Restore
Doc. ID: TECH31889 | 2013-10-23
DOCUMENTATION and DOWNLOAD: How to install and use Symantec's Veritas NetBackup Catalog Consistency Utility (NBCC) 188.8.131.52
Doc. ID: TECH67795 | 2013-10-24
DOCUMENTATION: How to set up a barcode rule for cleaning tapes
Doc. ID: TECH36700 | 2013-10-23
Device Monitor or vmoprcmd output shows that the drive is in PEND status.
Doc. ID: TECH23205 | 2013-10-23
Veritas NetBackup (tm) 3.4 - 6.0 Network Data Management Protocol (NDMP) Hardware Compatibility List (HCL)
Doc. ID: TECH22688 | 2013-10-24
How to force backups over multiple specific networks interfaces instead of all those available.
Doc. ID: TECH37209 | 2013-10-29
Commonly used Network Appliance commands necessary for troubleshooting VERITAS NetBackup issues.
Doc. ID: TECH8246 | 2013-10-23
GENERAL ERROR: The Volume Manager service (vmd) will not stay running on a Windows master or media server.
Doc. ID: TECH19068 | 2013-10-24
GENERAL ERROR: The message "No cleaning tape is defined in the device's robot or 0 cleanings remaining (315)" occurs when attempting to clean a tape drive via the command line or Administration Console.
Doc. ID: TECH22283 | 2013-10-24
GENERAL ERROR: A "Cannot connect on socket" error message is received when attempting to browse client files for restore from within the Backup, Archive, and Restore GUI.
Doc. ID: TECH20867 | 2013-10-23
How "Maximum Fragment Size" for a Storage Unit affects backups and restores
Doc. ID: TECH15692 | 2013-10-24
In-depth Troubleshooting Guide for Exit Status Code 41 in NetBackup Server (tm) / NetBackup Enterprise Server (tm) 5.0 / 5.1
Doc. ID: TECH42466 | 2013-10-23
STATUS CODE 277: Attempts to bring up drives through Device Monitor generate the error, "the drive is not ready or inoperable" with a NetBackup Status Code 277.
Doc. ID: TECH30178 | 2013-10-23
DOCUMENTATION AND DOWNLOAD: NetBackup Support Utility (NBSU) Usage and Examples for 6.x. NBSU was released with 6.5, 6.0 MP6, and 5.1 MP7, and replaces what is known as "nbsupport" in previous versions.
Doc. ID: TECH69881 | 2013-10-24
STATUS CODE 98: "Error requesting media (tpreq)" occurs, but only on a catalog backup. Normal backups complete without error.
Doc. ID: TECH39297 | 2013-10-23
This is a Firewall Configuration Example with NetBackup Media Server Outside the Firewall.
Doc. ID: TECH15010 | 2013-10-24