Backup Exec NDMP Option
Most Popular | Most Recent
Version : Environment :
During a NDMP backup with verify enabled the verify portion of the job runs at a slow rate.
Doc. ID: TECH209379 | 2013-08-06
NDMP Set copy jobs fail when incremental backup sets contain no data. Error the directory or file was not found, or could not be accessed.
Doc. ID: TECH202441 | 2013-07-25
NDMP Duplicate Jobs fail with '0xe000fe29 - Authentication failed on connection to the server' during the Verify stage
Doc. ID: TECH196847 | 2013-07-25
Troubleshooting Tape Device Detection Backup Exec for Windows NDMP Option (NetApp)
Doc. ID: TECH59381 | 2013-05-14
Unable to see any files in the restore view after the successful backup of the filer
Doc. ID: TECH206148 | 2013-05-13
Unable to duplicate an NDMP backup set from B2D into Dedup Storage Folder
Doc. ID: TECH204175 | 2013-03-22
After upgrading to Backup Exec 2012 from a previous version, backup jobs show superseded status and do not run
Doc. ID: TECH197987 | 2013-02-12
EMC Celerra NDMP Agent Information
Doc. ID: TECH51276 | 2012-11-02
Limitations to consider when backing up an NDMP Data OnTap 8 CLUSTER MODE Netapp Filer device with Backup Exec
Doc. ID: TECH146400 | 2012-10-18
A Library Initialize job for a NetApp device fails with error: “A device attached to the system is not functioning” when OnTap 8.0 is installed
Doc. ID: TECH146302 | 2012-10-18
How to add and configure Network Data Management Protocol (NDMP) Servers when the NDMP Option has been enabled on a media server
Doc. ID: TECH49622 | 2012-09-19
NDMP Verify after backup and Verify only jobs are not supported on some NDMP Devices
Doc. ID: TECH145928 | 2012-09-17
Netapp NDMP Verify jobs fails if the Verify job is setup to run After the backup Job finishes as a separate job OR as a separate scheduled job..
Doc. ID: TECH196669 | 2012-09-17
NDMP redirect restore shows following error in the Restore settings “This is an invalid path. Enter a path name using the following format ‘\\servername\
:\ ” but the job completes successfully.
Doc. ID: TECH186707 | 2012-09-14
Backup of an EMC Filer using the NDMP option in Backup Exec version 12.x and above fail with the error "0xe000130b"
Doc. ID: TECH66309 | 2012-08-15
Quantum Dxi67xx unable to detect fibre attached Quantum Scaler tape library to use DirectCopy in Backup Exec 2012.
Doc. ID: TECH194943 | 2012-08-14
While configuring an NDMP server, it displays an error: "Unable to connect to the NDMP server, or to the remote computer that is configured as a Remote Media Agent, or to the remote computer that is configured for deduplication."
Doc. ID: TECH189773 | 2012-08-08
Unable to restore from NDMP Backup 0xe000130b - The operation was terminated on the NDMP server
Doc. ID: TECH152974 | 2012-07-25
NDMP restore to NetApp FAS2040/Ontap 7.3.7 fails with 0xe000130a error
Doc. ID: TECH193559 | 2012-07-24
Restore selections do not show up for a duplicate of an NDMP set when that set was backed up to an OST device and duplicated to another OST device
Doc. ID: TECH181434 | 2012-07-24