Backup Exec NDMP Option
Most Popular | Most Recent
Version : Environment :
How to add and configure Network Data Management Protocol (NDMP) Servers when the NDMP Option has been enabled on a media server
Doc. ID: TECH49622 | 2012-09-19
NDMP Duplicate Jobs fail with '0xe000fe29 - Authentication failed on connection to the server' during the Verify stage
Doc. ID: TECH196847 | 2012-09-18
NDMP Verify after backup and Verify only jobs are not supported on some NDMP Devices
Doc. ID: TECH145928 | 2012-09-17
Netapp NDMP Verify jobs fails if the Verify job is setup to run After the backup Job finishes as a separate job OR as a separate scheduled job..
Doc. ID: TECH196669 | 2012-09-17
NDMP redirect restore shows following error in the Restore settings “This is an invalid path. Enter a path name using the following format ‘\\servername\
:\ ” but the job completes successfully.
Doc. ID: TECH186707 | 2012-09-14
Backup of an EMC Filer using the NDMP option in Backup Exec version 12.x and above fail with the error "0xe000130b"
Doc. ID: TECH66309 | 2012-08-15
Quantum Dxi67xx unable to detect fibre attached Quantum Scaler tape library to use DirectCopy in Backup Exec 2012.
Doc. ID: TECH194943 | 2012-08-14
While configuring an NDMP server, it displays an error: "Unable to connect to the NDMP server, or to the remote computer that is configured as a Remote Media Agent, or to the remote computer that is configured for deduplication."
Doc. ID: TECH189773 | 2012-08-08
How to enable debug logging on a NetApp NDMP device
Doc. ID: TECH180272 | 2012-07-25
Unable to restore from NDMP Backup 0xe000130b - The operation was terminated on the NDMP server
Doc. ID: TECH152974 | 2012-07-25
NDMP restore to NetApp FAS2040/Ontap 7.3.7 fails with 0xe000130a error
Doc. ID: TECH193559 | 2012-07-24
Restore selections do not show up for a duplicate of an NDMP set when that set was backed up to an OST device and duplicated to another OST device
Doc. ID: TECH181434 | 2012-07-24
NDMP backups or restores fail with The operation was terminated on the NDMP server.
Doc. ID: TECH159313 | 2012-07-11
Backup Exec 2012 for Windows Servers revision 1798 Hotfix 180962
Doc. ID: TECH180962 | 2012-05-23
Attempt to add an EMC Data Mover under NDMP server returns message "Unable to validate the NDMP server at this time"
Doc. ID: TECH64603 | 2012-05-16
During a restore of deduplicated files to an EMC Celerra filer, error: "Final error: 0xe000130a - The NDMP server returned a restore error." is received.
Doc. ID: TECH74460 | 2012-04-29
Poor restore performance with NDMP option when compared with the performance of backup jobs
Doc. ID: TECH72154 | 2012-04-29
NDMP backup job fails during verify stage with error E_PVL_UNENCRYPTED_DATA_ENCOUNTERED_WHILE_DECRYPTING ((BESTATUS)0xE0008122L) when Hardware Encryption is enabled.
Doc. ID: TECH180951 | 2012-04-27
Unable to redirect the restore of LUNs on a NetApp Filer
Doc. ID: TECH66079 | 2012-04-23
Exclusion statements in the backup selection list against a NetApp (or IBM) filer will cause the job to not backup the expected total amount of data.
Doc. ID: TECH66154 | 2012-04-23