Most Popular | Most Recent
Version : Environment :
Altiris IT Management Suite or Symantec-based Endpoint Management solutions may be affected - Microsoft Update (KB 2661254)
Doc. ID: TECH194869 | 2013-10-27
Error Codes list for Microsoft technologies
Doc. ID: TECH12638 | 2008-04-25
Error: PXE-E53: No boot filename received (DS 6.x & 7.x)
Doc. ID: TECH10532 | 2013-04-30
File not found Assembly errors
Doc. ID: TECH38471 | 2010-10-14
Ghost Error 1678: The following drives were not unmounted cleanly:
Doc. ID: TECH127683 | 2010-10-04
PXE E51 No DHCP or proxy DHCP offers were received
Doc. ID: TECH12323 | 2008-03-26
KNOWN ISSUE: Altiris Deployment Solution 6.9 is missing properties information for HP T5550 Thin Client running Windows CE
Doc. ID: TECH170546 | 2011-10-04
KNOWN ISSUE: The DS Web Console's About page displays values for PDA's instead of for Clients.
Doc. ID: TECH158901 | 2011-04-29
KNOWN ISSUE: During PCT Capture for Domain users, getting error 'Capture Personality task status: The specified users cannot be found (Exit code 16)'
Doc. ID: TECH122285 | 2011-05-26
PXE-E32: TFTP OPEN TIMEOUT error when attempting to PXE boot.
Doc. ID: TECH6342 | 2013-04-30
In what version of Deployment Solution will Mac 10.7 Lion be supported?
Doc. ID: TECH178622 | 2012-01-10
_Symantec_netBoot_Mtftp service fails to start
Doc. ID: TECH158983 | 2012-05-24
Receiving the error "The partition is not re-locatable" when deploying a RAW image to a hard drive.
Doc. ID: TECH37203 | 2010-06-29
PXE-E55: proxyDHCP service did not reply to request on port 4011
Doc. ID: TECH12489 | 2013-09-05
Error 1603 MainEngineThread is returning 1603
Doc. ID: TECH133259 | 2012-07-21
KNOWN ISSUE: WinPE 2.1 boot fails with ''Windows failed to start'' error
Doc. ID: TECH40825 | 2010-05-04
KNOWN ISSUE: DS7.1: Automation Environment Agent is unable to connect server when NS is installed on HTTPS
Doc. ID: TECH127620 | 2012-10-09
A Scripted install returns Error 3010 in Deployment Server, Patch Management and Software Delivery
Doc. ID: TECH12314 | 2006-02-06
Windows 2008 server with DHCP will not properly configure option 60 when a PXE server is installed
Doc. ID: TECH41571 | 2012-07-11
WinPE Automation error: "The boot selection failed because a required device is inaccessible"
Doc. ID: TECH39645 | 2011-03-18