Veritas™ Dynamic Multi-Pathing 6.0.1 Release Notes - Solaris

Article:DOC5934  |  Created: 2012-08-20  |  Updated: 2013-06-02  |  Article URL http://www.symantec.com/docs/DOC5934
Article Type
Documentation

Product(s)

Environment

Description



Veritas™ Dynamic Multi-Pathing 6.0.1 Release Notes - Solaris

Contents

1. Dynamic Multi-Pathing Release Notes
About this document
About Veritas Dynamic Multi-Pathing (DMP)
About Symantec Operations Readiness Tools
Important release information
Changes introduced in DMP 6.0.1
New versioning process for SFHA Solutions products
New directory location for the documentation on the software media
Dynamic Reconfiguration tool
Support for DMP within multiple Solaris I/O Domains
DMP support for Fusion-io iodrive and iodrive2 cards on Solaris
Changes related to installation and upgrades
System requirements
Hardware compatibility list
Supported Solaris operating systems
DMP: issues fixed in 6.0.1
Installation and upgrades: issues fixed in 6.0.1
Dynamic Multi-Pathing: issues fixed in 6.0.1
Known issues
Creating a zpool fails with a incorrect disk size error (2277875)
DMP aggregates EFI labelled LUNS to a 0_0 disk (2558408)
Splitting a mirror from a zpool causes a core dump (2273367)
Suppressing the primary path of an encapsulated SAN boot disk from Veritas Volume Manager causes the system reboot to fail (1933631)
Changes in enclosure attributes are not persistent after an upgrade to VxVM 6.0.1 (2082414)
Adding a DMP device or its OS device path as a foreign disk is not supported (2062230)
ZFS pool creation on a DMP device fails when the LUN size is between 1 TB and 2TB (2010919)
After changing the preferred path from the array side, the secondary path becomes active (2490012)
Continuous trespass loop when a CLARiiON LUN is mapped to a different host than its snapshot (2761567)
After excluding devices managed by PowerPath from VxVM, the devices still show as DMP devices (2494632)
The system may hang with Solaris 11 SRU1 (2876211)
In some cases with large LUN setup, the storage disappears after DMP device scan (2828328)
Installation known issues
Software limitations
DMP support for the Solaris format command (2043956)
DMP settings for NetApp storage attached environment
ZFS pool in unusable state if last path is excluded from DMP (1976620)
DMP does not support devices in the same enclosure that are configured in different modes (2643506)
Documentation
Documentation set
Manual pages

Attachments

dmp_notes_601_sol.pdf (445 kBytes)

Legacy ID



uxrt-601_dmp_notes_60sp1_v78569147


Article URL http://www.symantec.com/docs/DOC5934


Terms of use for this information are found in Legal Notices