Best practices for Backup Exec 2010 Remote Media Agent for Linux Servers

Article:HOWTO21771  |  Created: 2010-01-26  |  Updated: 2014-06-18  |  Article URL http://www.symantec.com/docs/HOWTO21771
Article Type
How To


Subject


Best practices for Backup Exec 2010 Remote Media Agent for Linux Servers

Best practices include tips and recommendations to help you use Symantec Backup Exec Remote Media Agent for Linux Servers (Remote Media Agent) effectively. For more information about the Remote Media Agent, see the Backup Exec 2010 Administrator's Guide.

The following best practices help you use the Remote Media Agent effectively:

  • Use a port number that is not in use by another application or service when you add a Remote Media Agent in Backup Exec.

    To change the port number, see the following URL:

    http://seer.entsupport.symantec.com/docs/275228.htm

  • Ensure that the storage device that is attached to the Linux server is supported. Also, confirm that the operating system can access the device before you start the Remote Media Agent.

    You can find a list of compatible devices at the following URL:

    Hardware Compatibility List

  • Ensure that a minimum of 500 MB of available storage space exists on the Linux server when you use the Tape Library Simulator Utility. The available space includes hard disk space, flash drives, and USB drives. If there is not enough space, the jobs fail with an end-of-media error. You must either create available disk space or you must direct the jobs to another volume, and then start the jobs again.

  • Add a Remote Media Agent from the central administration server if you use the Backup Exec Central Admin Server Option (CASO). You cannot add a Remote Media Agent from a managed media server.

  • Use the Linux server's hostname and not its IP address when you add a Remote Media Agent if you use the Shared Storage Option. If you use the IP address, the Backup Exec Database cannot distinguish which device path to use for jobs.

  • Only Microsoft Tape Format media are supported if you use a Remote Media Agent device to restore data from the tapes that other applications create.



Legacy ID



v16614761_be2010_bp


Article URL http://www.symantec.com/docs/HOWTO21771


Terms of use for this information are found in Legal Notices