Configuring a storage array by using the Storage Array Configuration Wizard

Article:HOWTO23908  |  Created: 2010-01-01  |  Updated: 2011-08-31  |  Article URL http://www.symantec.com/docs/HOWTO23908
Article Type
How To

Product(s)

Subject


Configuring a storage array by using the Storage Array Configuration Wizard

Use the Storage Array Configuration Wizard to configure a storage array for use with the Backup Exec Storage Provisioning Option.

Backup Exec then submits a Configure Storage Array job to create the virtual disks.

Note:

In a Central Admin Server Option (CASO) environment, run the Storage Array Configuration Wizard from the central administration server. You can run the Storage Array Configuration Wizard for any managed media server that has the Storage Provisioning Option installed. Managed media servers can share a single storage array but cannot share a virtual disk on a storage array.

See About using the Storage Array Configuration Wizard

See Viewing storage array components in Backup Exec

See About predicting disk usage in the Storage Provisioning Option

See Configuring an alert for low disk space on storage arrays

To configure a storage array by using the Storage Array Configuration Wizard

  1. On the Tools menu, click Configure Devices.

  2. Click Configure Storage Array.

  3. Do one of the following:

    In a non-CASO environment

    On the Welcome panel, select the storage array that you want to configure, and then click Next.

    In a CASO environment

    Do the following in the order listed:

    • On the Welcome panel, select the managed media server that you want to access the virtual disks.

    • Select the storage array that you want to configure.

    • Click Next.

  4. Follow the on-screen directions.


Legacy ID



v14992767_be2010_adm


Article URL http://www.symantec.com/docs/HOWTO23908


Terms of use for this information are found in Legal Notices