Adding a master server in OpsCenter

Article:HOWTO43034  |  Created: 2011-03-06  |  Updated: 2011-03-06  |  Article URL http://www.symantec.com/docs/HOWTO43034
Article Type
How To


Environment

Subject


Adding a master server in OpsCenter

To allow OpsCenter to communicate with a managed NetBackup server and collect data requires some security configuration. OpsCenter can monitor the master servers which have NetBackup Access Control (NBAC) configured and also those servers that do not have NBAC configured.

Note:

Symantec recommends that any NetBackup master server be monitored by only one OpsCenter server.

Use the following steps to add a master server. Note that you must first configure the master server to allow server access and data collection by OpsCenter. After configuring the master server, you must add this server to the OpsCenter console so that it can be monitored.

To add a master server

  1. Configure your managed master server to allow server access and data collection by OpsCenter.

    See Configuring a master server for server access and data collection by OpsCenter.

  2. After configuring the master server, you must add the master server to the OpsCenter console so that it can be monitored.

    See Adding a master server in the OpsCenter console.

Note:

You can use an alternate procedure to add a NetBackup 7.0 or later master server to OpsCenter. This procedure can be used for both NBAC and non-NBAC servers.

See Adding a NetBackup 7.0 or later master server.


Legacy ID



v33372590_v51189657


Article URL http://www.symantec.com/docs/HOWTO43034


Terms of use for this information are found in Legal Notices