Configuring NetBackup Access Control (NBAC) on standalone master servers

Article:HOWTO46896  |  Created: 2011-03-24  |  Updated: 2011-03-25  |  Article URL http://www.symantec.com/docs/HOWTO46896
Article Type
How To


Environment

Subject


Configuring NetBackup Access Control (NBAC) on standalone master servers

The following procedures describe how to configure NetBackup Access Control (NBAC) on the master servers that are installed on a single computer. A master server requires an authentication server and authorization server.

The following table describes the host names for the NBAC configuration examples.

Table: Example host names

Host name

Windows

UNIX

Master servers

win_master

unix_master

Media servers

win_media

unix_media

Clients

win_client

unix_client

The following procedure describes how to configure NBAC on standalone master servers.

Note:

Use -setupmaster and set USE_VXSS = AUTOMATIC on the master server. If USE_VXSS = REQUIRED is set on the master server and an attempt is made to configure NBAC on media server, the following error can occur: NetBackup master server is configured in REQUIRED Mode. Please change the mode to AUTOMATIC to complete configuration of the media server .

Configuring NBAC on standalone master servers

  1. Complete all of the NetBackup master server installations or upgrades.

  2. Run the bpnbaz -setupmaster command.

    Enter y. The system begins to gather configuration information. Then, the system begins to set up the authorization information.

  3. Restart the NetBackup services on this computer after the bpnbaz -setupmaster command completes successfully.

  4. Proceed to set up the media servers. See Configuring NetBackup Access Control (NBAC) on media servers

See About using NetBackup Access Control (NBAC)


Legacy ID



v32155874_v54411808


Article URL http://www.symantec.com/docs/HOWTO46896


Terms of use for this information are found in Legal Notices