About configuring pass-through recall for a file server cluster
|Article:HOWTO49557|||||Created: 2011-04-08|||||Updated: 2012-06-27|||||Article URL http://www.symantec.com/docs/HOWTO49557|
Note that if you configure pass-through recall for a file server cluster, all the cluster nodes must use identical pass-through recall settings.
In the file server properties for the target virtual file server, make sure that the pass-through recall settings are configured as follows:
The "Configure pass-through recall" setting is checked.
The disk cache location is a local path such as C:\FSACacheFolder. This path must be valid for a local disk on each cluster node.
If the cluster configuration supports only one active node, you may alternatively specify a location on the cluster's shared disk. For example, you can use a shared disk location for an A/P, A/P/P, or A/P/P/P configuration, but not for an A/A/P configuration, where A represents an active node and P represents a passive node.
The disk cache size is specified. We recommend that you make the cache size as large as possible.
Article URL http://www.symantec.com/docs/HOWTO49557