Device configuration status code 28

Article:HOWTO51417  |  Created: 2011-05-04  |  Updated: 2012-11-19  |  Article URL http://www.symantec.com/docs/HOWTO51417
Article Type
How To


Environment

Subject


Device configuration status code 28

Message: Invalid robot drive number for the robot type

Explanation: On a request to configure a drive to be in a robot, the robot drive number was not valid for the selected robot type.

Recommended Action: The robot drive number (for ACS robots, the set of ACS drive identifiers) is limited to the ranges that are based on the robot type. These limits are based on a supported device list. An invalid robot drive number means that the drive number was not within the acceptable range. Make sure that the robot hardware is supported and that the required patches are installed to support the robotic library. If the robot type is TLH or TLM, do not specify a robot drive number because the drives are addressed with a vendor drive name.


Legacy ID



v15105087_v55367249


Article URL http://www.symantec.com/docs/HOWTO51417


Terms of use for this information are found in Legal Notices