Device configuration status code 31
|Article:HOWTO51420|||||Created: 2011-05-04|||||Updated: 2012-11-19|||||Article URL http://www.symantec.com/docs/HOWTO51420|
Explanation: On a request to add or update a drive or robot in the device configuration, the following occurred: the robot number and robot type specified were not associated with any configured robots on the targeted device host.
Recommended Action: Check the device configuration on the targeted device host and identify the configured robots. Every drive that is configured as a robotic drive must already have its robot configured on that device host. Shared robotic libraries having robotic control on a remote host must have a logical robotic entry that refers to the remote host having robotic control. Add the robot to the device configuration first. Then add the drive. Define it to be in the robot. If the robot was already configured, specify the correct robot number and robot type on the drive or the robot configuration request.
Article URL http://www.symantec.com/docs/HOWTO51420