Best practices for using Backup Exec 2010 R3 Deduplication Option with the Central Admin Server Option or the SAN Shared Storage Option
|Article:HOWTO59043|||||Created: 2011-08-24|||||Updated: 2014-05-30|||||Article URL http://www.symantec.com/docs/HOWTO59043|
Best practices include tips and recommendations to help you effectively use the Backup Exec Deduplication Option with the Central Admin Server Option (CASO) or the SAN Shared Storage Option. For more information about the Deduplication Option, see the Backup Exec 2010 Administrator's Guide.
The following best practices apply to using the Deduplication Option with the Central Admin Server Option:
Do not run jobs that use a deduplication storage folder on a central administration server. Instead, assign backup jobs to managed media servers and select the option as a setting for the destination device.
Share the deduplication storage folders that are on multiple managed media servers with the media server that is the replication target. This provides the best use of optimized duplication. For example, the main office site that has a managed media server deployment shares the deduplication storage folder with the central administration server at a remote site for disaster recovery purposes.
Subdivide the Remote Agents for Deduplication among the servers that host the deduplication storage folders to best optimize several managed media servers at a single site. For example, a large site with two managed media servers and 10 Remote Agent for Deduplication deployments should split the Remote Agents evenly between the managed media servers.
- Verify all backup data.
- Symantec recommends the following as minimum disk speeds per individual read, write, or verify operation for 32 TBs of storage:
- 130 MB per second
- 200 MB per second for enterprise-level performance
- Computers with disk speeds greater than 200 MB per second have optimal read and write performance deduplication.
- Computers with disk speeds between 150-200 MB per second have sufficient read and write speed for deduplication.
- Computers with disk speeds between 100-150 MB per second have some operations with degraded performance.
- Computers with disk speeds less than 100 MB per second experience poor performance. You should improve disk reads and writes before you install and run deduplication.
- For deduplication disk storage connection, the following are supported:
- Storage area network (Fibre Channel or iSCSI)
- Direct-attached storage (DAS)
- IInternal disks
- For deduplication disk storage connection, the following are not supported:
- Removable disks including USB
- FireWire devices
- The media server should have redundant connectivity to the storage.
- The storage network must be a dedicated, low latency network with a maximum of 1-millisecond latency per round trip.
- The storage network must have enough bandwidth to meet your throughput objectives. Symantec supports the following storage network bandwidths:
- iSCSI SANs with a bandwidth of at least 10 Gb per second.
- Fibre Channel SANs with a bandwidth of at least 4 Gb per second.
The following best practices apply to using the Deduplication Option with the SAN Shared Storage Option:
Subdivide the Remote Agents for Deduplication among the servers that host the deduplication storage folders. This provides the best optimization of several secondary media servers at a single site. For example, a large site with multiple secondary media servers and several Remote Agent for Deduplication deployments should evenly split the Remote Agents for Deduplication between the secondary media servers.
- To perform optimized duplication between a central administration server and a managed Backup Exec server, the following WAN requirements must be met:
- Less than one percent packet loss during transmissions
- Less than 250 milliseconds network latency (round trip)
Article URL http://www.symantec.com/docs/HOWTO59043