Displaying the raw device access settings for a volume set
| Article:HOWTO59602 | | | Created: 2011-10-13 | | | Updated: 2011-10-13 | | | Article URL http://www.symantec.com/docs/HOWTO59602 |
You can use the vxprint -m command to display the current settings for a volume set. If the makedev attribute is set to on, one of the following strings is displayed in the output:
vset_devinfo=on:read-only | Raw device nodes in read-only mode. |
vset_devinfo=on:read-write | Raw device nodes in read-write mode. |
A string is not displayed if makedev is set to off.
If the output from the vxprint -m command is fed to the vxmake command to recreate a volume set, the vset_devinfo attribute must set to off. Use the vxvset set command to re-enable raw device access with the desired access mode.
See Controlling raw device access for an existing volume set
|
|
Legacy ID
uxrt-51sp1_v45034110_v63475671
Article URL http://www.symantec.com/docs/HOWTO59602
Terms of use for this information are found in Legal Notices
Thank you.