Restoring a Linux client with media boot
If NetBackup access management is used in your environment, you must provide the appropriate credentials when prompted so that NetBackup can restore the client files.
Use the following procedure for Linux clients.
To restore a Linux client with media boot
Prepare to restore the client using the SRT you created on the bootable media.
See Preparing a client for restore
Insert the bootable CD or bootable DVD into the CD-ROM drive.
On some systems, you may have to modify the BIOS settings so that the system boots from the CD-ROM drive. Consult your hardware documentation for details.
Turn off the client, then turn it on.
Enter the required information at the following BMR process prompts:
Client name (for a discovery boot, enter the client's name as it appears in the view from the prepare-to-discover operation)
Client IP address
NetBackup master server name
NetBackup master server IP address
NetBackup master server gateway IP address
Additional gateway address to reach the NetBackup master server
The restore begins.