Restoring a Windows client with media boot

Article:HOWTO68820  |  Created: 2012-02-06  |  Updated: 2012-02-06  |  Article URL http://www.symantec.com/docs/HOWTO68820
Article Type
How To

Product(s)

Subject


Restoring a Windows client with media boot

Note:

If NetBackup access management is used in your environment, you must provide the appropriate credentials when prompted so that NetBackup can restore the client files.

To media boot a Windows client, do the following.

To restore a Windows client with media boot

  1. Prepare to restore the client.

    See Preparing a client for restore

  2. Create a bootable CD or bootable DVD from the SRT used during the Prepare to Restore.

  3. Insert the bootable CD or bootable DVD into the CD-ROM drive.

    On some systems, you may have to modify the BIOS settings so that the system boots from the CD-ROM drive. Consult your hardware documentation for details.

  4. Turn off the client, then turn it on.

    The following message appears:

    press any key to boot from CD
  5. The system boot and the restore begin with no further intervention required.


Legacy ID



v13585048_v71529406


Article URL http://www.symantec.com/docs/HOWTO68820


Terms of use for this information are found in Legal Notices