About Veritas Dynamic Multi-Pathing

Article:HOWTO74834  |  Created: 2012-03-26  |  Updated: 2012-03-27  |  Article URL http://www.symantec.com/docs/HOWTO74834
Article Type
How To


Environment


About Veritas Dynamic Multi-Pathing

See Migrating LVM volume groups to DMP

See About setting up DMP to manage native devices

Veritas Dynamic Multi-Pathing (DMP) provides multi-pathing functionality for the operating system native devices configured on the system. DMP creates DMP metadevices (also known as DMP nodes) to represent all the device paths to the same physical LUN.

DMP is available as a component of Storage Foundation. DMP supports Veritas Volume Manager (VxVM) volumes on DMP metadevices, and Veritas File System (VxFS) file systems on those volumes.

DMP is also available as a stand-alone product, which extends DMP metadevices to support the OS native logical volume manager (LVM). You can create LVM volumes and volume groups on DMP metadevices.

DMP supports LVM volume devices that are used as the paging devices.

Veritas Dynamic Multi-Pathing can be licensed separately from Storage Foundation products. Veritas Volume Manager and Veritas File System functionality is not provided with a DMP license.

DMP functionality is available with a Storage Foundation Enterprise license, SF HA Enterprise license, and Standard license.

Veritas Volume Manager (VxVM) volumes and disk groups can co-exist with LVM volumes and volume groups, but each device can only support one of the types. If a disk has a VxVM label, then the disk is not available to LVM. Similarly, if a disk is in use by LVM, then the disk is not available to VxVM.


Legacy ID



uxrt-60_v39378954_v71682875


Article URL http://www.symantec.com/docs/HOWTO74834


Terms of use for this information are found in Legal Notices