Removing DMP support for native devices

Article:HOWTO74836  |  Created: 2012-03-26  |  Updated: 2012-03-27  |  Article URL http://www.symantec.com/docs/HOWTO74836
Article Type
How To


Environment


Removing DMP support for native devices

See Migrating LVM volume groups to DMP

The dmp_native_support tunable is persistent across reboots and fileset upgrades.

You can remove an individual device from control by LVM if you initialize it for VxVM, or if you set up TPD multi-pathing for that device.

To remove support for native devices from all DMP devices, turn off the dmp_native_support tunable.

This operation also disables DMP support for LVM rootvg, so it requires that you reboot the system. You can enable DMP support for the LVM rootvg separately, if required.

To turn off the dmp_native support tunable:

# vxdmpadm settune dmp_native_support=off

To view the value of the dmp_native_support tunable:

# vxdmpadm gettune dmp_native_support
Tunable               Current Value      Default Value
--------------------- ----------------   --------------
dmp_native_support          off              off

To retain DMP support for LVM rootvg after the dmp_native_support tunable is turned off, use the following command:

# vxdmpadm native enable vgname=rootvg

Legacy ID



uxrt-60_v39908217_v71682875


Article URL http://www.symantec.com/docs/HOWTO74836


Terms of use for this information are found in Legal Notices