Re-enabling the DMP paths on an array or initiator using Veritas Operations Manager 5.0

Article:HOWTO78188  |  Created: 2012-08-24  |  Updated: 2012-08-24  |  Article URL http://www.symantec.com/docs/HOWTO78188
Article Type
How To

Product(s)

Subject


Re-enabling the DMP paths on an array or initiator using Veritas Operations Manager 5.0

In Veritas Operations Manager, you can re-enable the DMP paths that you have disabled as part of the maintenance operation. You can re-enable the DMP paths in the following ways:

  • Immediately after disabling the DMP paths for an array port, array adapter, or an initiator

  • Using the [Total number of waiting cases] case(s) waiting for user action link on the Solutions page

  • Using the wizard panel to start a new DMP maintenance case

To re-enable the DMP paths immediately after disabling them

  1. After you disable the DMP paths on an array or an initiator, click Next.

    See Paths Disabled panel options for disabling DMP paths.

  2. In the Paths Re-Enable Confirmation panel, click Re-Enable.

    See Paths Re-Enable Confirmation panel options for re-enabling the DMP paths on an array or initiator.

  3. In the Paths Enabled panel, review the details of the re-enabled paths. Click Next.

    See Paths Enabled panel options for re-enabling the DMP paths on an array or initiator.

  4. In the Veritas DMP Maintenance Result Summary page, view the details of the current paths and the commands run to complete the operation. Click Close.

    See Veritas DMP Maintenance Result Summary panel for viewing the overall summary of the DMP maintenance case.

To re-enable the DMP paths using the Solutions home page option

  1. In the Veritas Operations Manager console, select Solutions to go the Solutions page.

  2. Under Veritas DMP Maintenance, click the link for the cases pending for the user action.

  3. In the Veritas DMP Maintenance Waiting Cases page, select the pending case and click Actions > Resume Case and Re-Enable Paths

  4. In the Paths Re-Enable Confirmation panel, click Re-Enable.

    See Paths Re-Enable Confirmation panel options for re-enabling the DMP paths on an array or initiator.

  5. In the Paths Enabled panel, review the details of the re-enabled paths. Click Next.

    See Paths Enabled panel options for re-enabling the DMP paths on an array or initiator.

  6. In the Veritas DMP Maintenance Result Summary page, view the details of the current paths and the commands run to complete the operation. Click Close.

    See Veritas DMP Maintenance Result Summary panel for viewing the overall summary of the DMP maintenance case.

To re-enable the DMP paths using the Start wizard panel

  1. In the Veritas Operations Manager console, select Solutions to go the Solutions page.

  2. Under Veritas DMP Maintenance, click Start new Veritas DMP Maintenance case.

  3. In the Start panel, click Resume Existing Veritas DMP Maintenance Case and choose a case name from the Unfinished Cases drop-down list. Click Next.

    See Start panel options for disabling DMP paths.

  4. In the Paths Re-Enable Confirmation panel, click Re-Enable.

    See Paths Re-Enable Confirmation panel options for re-enabling the DMP paths on an array or initiator.

  5. In the Paths Enabled panel, review the details of the re-enabled paths. Click Next.

    See Paths Enabled panel options for re-enabling the DMP paths on an array or initiator.

  6. In the Veritas DMP Maintenance Result Summary page, view the details of the current paths and the commands run to complete the operation. Click Close.

    See Veritas DMP Maintenance Result Summary panel for viewing the overall summary of the DMP maintenance case.

See Disabling the DMP paths on an initiator using Veritas Operations Manager 5.0


Legacy ID



v43210093_v71172234


Article URL http://www.symantec.com/docs/HOWTO78188


Terms of use for this information are found in Legal Notices