About the Enforcer appliance indicators and controls

Article:HOWTO81761  |  Created: 2012-10-25  |  Updated: 2014-09-21  |  Article URL http://www.symantec.com/docs/HOWTO81761
Article Type
How To


About the Enforcer appliance indicators and controls

The Enforcer appliance is installed on a 1U rack-mountable chassis with support for static rails.

You can use the provided serial port and the serial cable to connect to another system that is hooked up to a monitor and keyboard. Alternatively, you can connect a monitor or keyboard directly. If you connect by using the serial port, the default baud rate that is set on the Enforcer is 9600 bps. You must configure the connection on the other system to match. Connecting by the serial port is the preferred method. It lets you transfer files, such as debugging information, to the connected computer for troubleshooting.

See Installing an Enforcer appliance.

See Setting up an Enforcer appliance.

Legacy ID


Article URL http://www.symantec.com/docs/HOWTO81761

Terms of use for this information are found in Legal Notices