Physical to Virtual (P2V) conversion to ESX/ESXi server fails: 'Error EC8F1F48: The 'VMware VMDK' conversion process could not be completed. Error EC8F1FDB: Unable to create virtual disk.'

Article:TECH126081  |  Created: 2010-01-04  |  Updated: 2013-10-26  |  Article URL http://www.symantec.com/docs/TECH126081
Article Type
Technical Solution



Subject

Issue



Physical to Virtual (P2V) conversion to ESX/ESXi server fails: 'Error EC8F1F48: The 'VMware VMDK' conversion process could not be completed. Error EC8F1FDB: Unable to create virtual disk.'


Error



Error EC8F1F48: The 'VMware VMDK' conversion process could not be completed.
Error EC8F1FDB: Unable to create virtual disk. This could be due to one
of the following reasons:
- Destination path does not exist.
- Insufficient disk space.
- Invalid credential or permissions on destination path.


Solution



Verify the credentials, network path/IP Address, and sufficient network space to handle the VMDK convesion. If these are fully verified to be valid, this error will also occur if the ESX or ESXi server is not licenced with VMWare.
 
NOTE: If this error occurs on a non-licensed ESX\ESXi installation, this is a VMware specific issue. VMware requires that the ESX/ESXi server be licensed for VDDK APIs to work correctly. VMware's VDDK APIs are used during the P2V conversion to ESX/ESXi server. With ESX/ESXi Free License edition, VDDK APIs won't work and a "Host is not licensed for this feature" error will be seen.
 

NOTE: Backup Exec System Recovery (BESR) 2010 uses VMware VDDK 1.1, which has official support for Windows XP, 2003 and Vista.
Symantec System Recovery (SSR), formerly Backup Exec System Recovery, uses VMWare VDDK 1.2, which adds support for Windows 7 and 2008, as well as those operating systems supported in BESR.
 
VMware advises that customers may experience technical issues where BESR is used during VMWare conversions on Windows 7 and 2008, as these platforms are not officially supported. Errors include but may not be limited to those mentioned above. Symantec recommends using SSR when converting using Windows 7 and 2008 operating systems.

Supplemental Materials

SourceETrack
Value1941728
Description

ESXi server fails if the ESXi has free license.


SourceETrack
Value1955217
Description

ESX server fails if the ESX has free license.


SourceError Code
ValueEC8F1F48
Description

The 'Vmware VMDK' conversion process could not be completed.


SourceError Code
ValueEC8F1FDB
Description

Unable to create virtual disk.


Legacy ID



345294


Article URL http://www.symantec.com/docs/TECH126081


Terms of use for this information are found in Legal Notices