Backup Exec Remote Agent for Windows installation fails with an unexpected error: Invalid Class

Article:TECH128915  |  Created: 2010-01-17  |  Updated: 2012-09-20  |  Article URL http://www.symantec.com/docs/TECH128915
Article Type
Technical Solution


Subject

Issue



Backup Exec Remote Agent for Windows installation fails with an unexpected error: Invalid Class


Error



Event Source: .NET Runtime 2.0 Error Reporting
Event Category: None
Event ID: 5000
Description: EventType clr20r3, P1 _setup.exe, P2 13.0.173.0, P3 4b17cf73, P4 s

ERROR: Installation failed with error -532459699. GetLastError = :

 During push installation of Backup Exec Remote Agent for Windows System, following error is observed :
 "WMI is not accessible or disabled or may be blocked by the firewall" or " fails with error 1603"
 

During local installation of Backup Exec Remote Agent for Windows System, the following error is observed :
 
RAWSInst.htm shows:
 
The install failed with an unexpected error:
 
at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo) at System.Management.ManagementObjectCollection.ManagementObjectEnumerator.MoveNext() at Symantec.BackupExec.AgentSeqDlgs.AgentInstaller.GetVMwareGuest() at Symantec.BackupExec.AgentSeqDlgs.AgentInstaller.GetMSICommandLine() at Symantec.IFrameSDK.Iframe2.ProductInstaller.StartInstall(BaseDialog dlg) at Symantec.BackupExec.AgentSeqDlgs.AgentInstaller.StartInstall(BaseDialog dlg) at Symantec.IFrameSDK.Iframe2.MultiProductInstaller.Install_Product_Thread() at System.Threading.ThreadHelper.ThreadStart_Context(Object state) at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state) at System.Threading.ThreadHelper.ThreadStart() 04-13-2010,08:52:04 : If this install is being run from a network share, copying the media locally and retrying the install may resolve this issue. 
 
ERROR: Installation failed with error -532459699. GetLastError = :0
 
Other errors observed:
 
The install failed with an unexpected error: Object reference not set to an instance of an object.
 
ERROR: Installation failed with error -1073741819. GetLastError = :0
 
Figure1
 
  
 

 


Cause



WMI Service is not started and the properties of WMI Control shows Invalid class or Access Denied.
 
 

Solution



Solution 1 :- Start WMI Service
 
Check the Windows services snap-in and verify that the Windows Management Instrumentation service is started and running.
 
Solution 2: Corrupt WMI
 
If there are any issues found with WMI, take corrective action and resolve the issues with WMI.
 
Solution 3: Add the service account into the Local Administrator's Group
 
Verify that the account being used to perform the installations is a part of the local administrator's group.
 
Solution 4: Install Microsoft Dot Net Version 2 Service Pack 2
 
If Microsoft .Net SP2 is not installed, please install it. You can download it from  http://www.microsoft.com/downloads/details.aspx?familyid=5b2c0358-915b-4eb5-9b1d-10e506da9d0f&displaylang=en 
 
Solution 5: Install Service Pack 1 for Backup Exec 2010
 
The fix for the GetVMwareGuest error above has been released in Service Pack 1 for Backup Exec 2010. It can be obtained from http://www.symantec.com/docs/TECH136199

Supplemental Materials

SourceETrack
Value2031375
Description

RAWS 2010 upgrade installation fails on AgentSeqDlgs!Symantec.BackupExec.AgentSeqDlgs.AgentInstaller.GetVMwareGuest()+0x245. Final error is ERROR: Installation failed with error -1073741819


SourceEvent ID
ValueEvent ID: 5000
Description

Event Source: .NET Runtime 2.0 Error Reporting
Event Category: None
Event ID: 5000
Description: EventType clr20r3, P1 _setup.exe, P2 13.0.173.0, P3 4b17cf73, P4 s
 


Legacy ID



350652


Article URL http://www.symantec.com/docs/TECH128915


Terms of use for this information are found in Legal Notices