DDI-1 is the current package for Storage Foundation (tm) 5.1 SP1 for Windows, please read the Readme.pdf located inside the download package for up-to-date information about this package and installation instructions.

New additions/enhancements for Dynamic Multipathing (DMP) Device-Specific Module's (DSM) in this DDI package:  

 

DMP DSM Support (VHPEVA) for the HPEVA 4400 series array
DMP DSM Support (VHPMSA2) for the HP MSA 2212FC series array  
DMP DSM Support (VIBMAPDS) for the IBM DS3200/DS3300 series array  
DMP DSM Support (VENGAP) for the IBM DS4500 series array and SUN 6180  
DMP DSM Support (VXiV) for the IBM XiV series array  
DMP DSM Support (VEQLOGIC) for the Dell Equallogic series array  
DMP DSM Support (VXIOTECH) for the XioTech series array
DMP DSM Support (VCOMPLNT) for the COMPELLENT Vol array

Added support for SUN 6180 in VENGAP DSM

General Notes:

This DDI package requires that Veritas Storage Foundation for Windows 5.1 SP1 be installed.

This SFW 5.1 DDI 1 package contains mpioprov.dll. The version of mpioprov.dll is updated to 5.1.11000.0.

This SFW 5.1 DDI 1 package contains SFW 5.1 GUI fix related to SFW DMP DSM display.    

Notes about hardware compatibility:
Symantec maintains a Hardware Compatibility List (HCL) for Veritas Storage Foundation & High Availability Solutions 5.1 for Windows Products on the Veritas Support web site. The HCL gives information on HBAs, firmware, and switches that have been tested with each supported array. Check the HCL for details about your hardware before installing this DDI package.

Refer to SFW 5.1SP1 HCL for the latest list of supported arrays. http://entsupport.symantec.com/docs/302144 

IMPORTANT:
Storage arrays may require additional configuration steps or updates to work with Veritas Storage Foundation for Windows and MPIO. Contact the manufacturer of the storage array for details.    

Notes about Microsoft iSCSI:
Setting the load balancing with the Microsoft iSCSI Initiator for an iSCSI device that is claimed by Veritas DMP DSMs does not change the load balancing of the Veritas DMP DSM. Setting the load balancing of an iSCSI device claimed by a Veritas DMP DSM should be done with the SFW VEA GUI or CLI commands.