This issue can be seen when exporting the entire archive back to a mailbox.  The calculation to determine the space required in the mailbox is over-estimating the space required and will not allow the export to proceed until the Storage Limits have been increased.  

The following event can be seen when the export fails.  

Event Type: Error
Event Source: Enterprise Vault
Event Category: Migrator Server
Event ID: 6768
Description:
Export Archive Report

Export status: Incomplete

Processing aborted. The mailbox does not have enough space to complete the export archive operation. Increase the indicated mailbox storage limits by at least 696551KB and run Export Archive again to export the archived items to the mailbox.

Current mailbox quota used: 24099KB

Set the Prohibit send limit to at least 1720551KB

Set the Prohibit send and receive limit to at least 1720551KB

The Prohibit send limit and Prohibit send and receive limit will both be listed if the calculation for the export exceeds both currently set values.  


Workaround
1.  Remove the Storage Limits for the user temporarily and perform the export to the mailbox.  Then re-apply the Storage Limits.

2.  Increase the Storage Limits Prohibit send at (KB) and Prohibit send and receive at (KB) values to a value that is double the size in the archive + the current size of the mailbox.  For example, if there is 50 MB in the archive and the mailbox is currently 25 MB then the values should be set to no less than 125000.  

NOTE:  The Total Size (MB) in the archive can be determined by reviewing the usage report for that users vault store.  This can be displayed by going to http://Enterprise_Vault_server_name/enterprisevault/usage.asp and selecting the appropriate vault store.  

3. Adjust Storage Limits to value(s) specified in the Event 6768 details.  

 

Symantec Corporation has acknowledged that the above-mentioned issue is present in the current version(s) of the product(s) mentioned at the end of this article. Symantec Corporation is committed to product quality and satisfied customers.
 

This issue is currently under investigation by Symantec Corporation. Pending the outcome of the investigation, this issue may be resolved by way of a patch or hotfix in current or future revisions of the software. However, this particular issue is not currently scheduled for any release.  If you feel this issue has a direct business impact for you and your continued use of the product, please contact your Symantec Sales representative or the Symantec Sales group to discuss these concerns.  For information on how to contact Symantec Sales, please see  http://www.symantec.com

Please be sure to refer back to this document periodically as any changes to the status of the issue will be reflected here.