How to change Administrator User (admin@logicbase.com in 7.0, 7.1 and 7.1 SP1 or admin@symantec.com in 7.1 SP2) password after installation?

Article:TECH146586  |  Created: 2010-12-20  |  Updated: 2012-01-18  |  Article URL http://www.symantec.com/docs/TECH146586
Article Type
Technical Solution


Issue



The e-mail address/username of built-in Administrator User is by default:

In ServiceDesk 7.0, when Administrator User password is changed after installation, the admin and all users are locked out of ServiceDesk. The guidance from Support has generally been to completely reinstall ServiceDesk to remediate the issue.

In ServiceDesk 7.1, attempting to change the Administrator User password results in a permissions error and the password won't be changed.


Environment



ServiceDesk 7.0
ServiceDesk 7.0 MR1
ServiceDesk 7.0 MR2

ServiceDesk 7.1
ServiceDesk 7.1 SP1
ServiceDesk 7.1 SP2

 


Solution



The process of updating Administrator User password is not seamless in ServiceDesk. Setting up ServiceDesk in a distributed environment further complicates this issue as the passwords on all application servers must be in sync. To address this, a utility is available that will accept a new password for the currently configured admin user in the ProcessManager portal web.config and change the hashed password both in the web.config and in the database. You can use the ChangeAdminPassword tool to effectively change the password, on demand, for the system account that is used throughout workflow for cross-service operations. Please read and understand the following notes before continuing.

Steps to Implement

1. For ServiceDesk 7.0, the Symantec.ServiceDesk.ChangeAdminPassword.exe utility from attached archive must be placed in the ProcessManager install directory prior to execution (the same directory as the web.config file). It will not work if you try to run it from any other location. For ServiceDesk 7.1, the ChangeAdminPassword.exe file is already installed with ServiceDesk and is located in the ProcessManager directory.
2. After changing the password using this utility on a given server, you must also open the workflow server settings from the task tray application, select the server which is set as the process manager server (usually called "(local)"), and change the password there as well. This will allow the designer and other local tools to connect to the portal web services.

Multiple Servers:

1. Before proceeding, please ensure the password for each ServiceDesk application server is set to “admin.”  You may use the utility to change the password for each server.
2. If you have multiple ServiceDesk servers, you must run this tool on all of them; however, on all subsequent servers after the first one, you must put the new password in all 3 checkboxes (Old, New, Retype). This will force the web.config files on those servers to align with the password that is already in the database.

 


Attachments

ServiceDesk 7.0 Password Reset Tool. ZIP password is "servicedesk" (without quotes).
ServiceDesk-passwordReset.zip (22 kBytes)

Supplemental Materials

SourceETrack
Value2143921
Description

Changing admin@logicbase.com password after installation necessitates a complete reinstallation of ServiceDesk.


SourceETrack
Value2029566
Description

Give admin ability to change the admin@logicbase password after installation.



Article URL http://www.symantec.com/docs/TECH146586


Terms of use for this information are found in Legal Notices