When you configure the 802.1x profile using Symantec, you are unable to select EAP-PEAP (MS-CHAP v2) as protocol and select NONE as Client Certificate Authority - this works with the Intel AMT console

Article:TECH158195  |  Created: 2011-04-15  |  Updated: 2011-04-15  |  Article URL http://www.symantec.com/docs/TECH158195
Article Type
Technical Solution


Issue



When you configure the 802.1x profile using Symantec, you are unable to select EAP-PEAP (MS-CHAP v2) as protocol and select NONE as Client Certificate Authority - this works with the Intel AMT console.


Environment



Out of Band Management 7.0, 7.1.


Cause



Out of Band was configured not to allow none to be selected for Client Certificate Authority.


Solution



For 7.1, 7.1 SP1 will resolve this issue.

For 7.0, a Pointfix can be obtained to resolve this issue. Please contact support.

The following instructions to be used to apply the point-fix:

  1. Unpack zip file to a folder on NS server.
  2. Open Install.bat for edit and check that path to Altiris folder is correct for your installation in the next statement: SET ALTIRIS_ROOT_PATH; Change this value if needed.
  3. Save Install.bat if edited
  4. Open CMD on NS Server with Administrative Rights.
  5. Browse to folder with unpacked PointFix files.
  6. Run Install.bat
  7. Similar procedure for uninstallation (uninstall.bat to be used)

 


Supplemental Materials

SourceETrack
Value2324295


Article URL http://www.symantec.com/docs/TECH158195


Terms of use for this information are found in Legal Notices