Device Driver Installation Package Q3 2011 (DDI Q3 2011 package) for Veritas Storage Foundation 5.1 Service Pack 1 (SP1) and Service Pack 2 (SP2) for Windows and Veritas Dynamic Multi-Pathing 5.1 for Windows

Article:TECH170902  |  Created: 2011-09-30  |  Updated: 2011-09-30  |  Article URL http://www.symantec.com/docs/TECH170902
Article Type
Technical Solution


Environment

Issue



Device Driver Installation Package Q3 2011 for Veritas Storage Foundation 5.1 SP1 and SP2 for Windows (SFW HA) and Veritas Dynamic Multi-Pathing 5.1 for Windows (DMPW)


Solution



DDI Q3 2011 is the current package, please read the Readme.pdf located inside the download package for up-to-date information about this package and installation instructions.

Notes about hardware compatibility

Symantec maintains a Hardware Compatibility List (HCL) for Veritas Storage Foundation and High Availability Solutions for Windows products on the Symantec Support web site. The HCL gives information on HBAs, firmware, and switches that have been tested with each supported array. Check the HCL for details about your hardware before installing this DDI package.

For SFW or SFW HA 5.1 SP1, refer to the 5.1 SP1 HCL for the latest list of supported arrays:

http://www.symantec.com/docs/TECH77195

For SFW or SFW HA 5.1 SP2 or DMPW 5.1, refer to the 5.1 SP2 HCL for the latest list of supported arrays:

http://www.symantec.com/docs/TECH138719

IMPORTANT
Storage arrays may require additional configuration steps or updates to work with Veritas Storage Foundation for Windows and MPIO. Contact the manufacturer of the storage array for details.


Attachments

DDI_Q3_2011_package_32bit.zip (160.2 MBytes)
DDI_Q3_2011_package_64bit.zip (183.4 MBytes)





Article URL http://www.symantec.com/docs/TECH170902


Terms of use for this information are found in Legal Notices