VxVM vxdmpadm ERROR V-5-1-15690:RP2 upgrade with vxvm duing 'prestop' tasks
| Article:TECH178442 | | | Created: 2012-01-06 | | | Updated: 2012-07-28 | | | Article URL http://www.symantec.com/docs/TECH178442 |
Problem
installrp for upgrade from 5.1SP1RP1P2 to RP2 fails when dmp_native_support is on and zpools are imported.
Error
The following error occurs when the RP2 install is performing SFHA prestop tasks:
VxVM vxdmpadm ERROR V-5-1-15690 Operation failed for one or more zpoolsVxVM vxdmpadm ERROR V-5-1-15686 The following zpool(s) could not be migrated as they are not healthy -
zpoolname
Environment
Solaris 10 withSF 5.1_SP1RP1P2
Cause
This can occur because dmp_native_support remains "on" even after issuing the command to turn it off. This may be a seen if settings were previously wrong, but were honored after a code upgrade.
Solution
A device tree cleanup was needed to turn dmp_native_support to "off."
Perform a device tree cleanup since export of zpools alone does not solve the issue. This can occur because dmp_native_support remains "on" and a device tree cleanup was needed to turn dmp_native_support to "off." After this procedure the upgrade to RP2 succeeds:
* Perform a device tree cleanup
* Verify dmp_native_support if off
* Verify namingscheme is EBN
* Export zpools
* Perform the upgrade to RP2.
|
|
Related Articles
Article URL http://www.symantec.com/docs/TECH178442
Terms of use for this information are found in Legal Notices
Thank you.