Device Driver Installation Package Q4 2011 (DDI Q4 2011 package) for Veritas Storage Foundation 5.1 Service Pack 1 (SP1) and Higher for Windows and Veritas Dynamic Multi-Pathing 5.1 and higher for Windows
| Article:TECH179175 | | | Created: 2012-01-17 | | | Updated: 2013-01-24 | | | Article URL http://www.symantec.com/docs/TECH179175 |
Problem
Device Driver Installation Package Q4 2011 for Veritas Storage Foundation 5.1 SP1 and Higher for Windows (SFW HA) and Veritas Dynamic Multi-Pathing 5.1 and Higher for Windows (DMPW)
Solution
DDI Q4 2012 is the current package and can be downloaded from Related Articles section below.
DDI Q4 2011 is available and can be downloaded from this technote.
Notes about hardware compatibility
Symantec maintains a Hardware Compatibility List (HCL) for Veritas Storage Foundation and High Availability Solutions for Windows products on the Symantec Support web site. The HCL gives information on HBAs, firmware, and switches that have been tested with each supported array. Check the HCL for details about your hardware before installing this DDI package.
For SFW or SFW HA 5.1 SP1, refer to the 5.1 SP1 HCL for the latest list of supported arrays:
For SFW or SFW HA 5.1 SP2 or DMPW 5.1, refer to the 5.1 SP2 HCL for the latest list of supported arrays:
For SFW or SFW HA 6.0 or DMPW 6.0, refer to the 6.0 HCL for the latest list of supported arrays
IMPORTANT
Storage arrays may require additional configuration steps or updates to work with Veritas Storage Foundation for Windows and MPIO. Contact the manufacturer of the storage array for details
Storage arrays may require additional configuration steps or updates to work with Veritas Storage Foundation for Windows and MPIO. Contact the manufacturer of the storage array for details
Attachments
|
|
|
|
|
|
|
|
Related Articles
Article URL http://www.symantec.com/docs/TECH179175
Terms of use for this information are found in Legal Notices
Thank you.