Which ports of NetBackup 5220 and 5230 appliances should be configured in target mode

Article:TECH183718  |  Created: 2012-03-13  |  Updated: 2013-09-16  |  Article URL http://www.symantec.com/docs/TECH183718
NOTE: If you are experiencing this particular known issue, we recommend that you Subscribe to receive email notification each time this article is updated. Subscribers will be the first to learn about any releases, status changes, workarounds or decisions made.
Article Type
Technical Solution

Product(s)

Issue



When NetBackup 5220 and 5230 appliances are configured as Fibre Transport Media Servers, certain ports should be configured in target mode to receive data from SAN clients.


Error



Status 83 if wrong ports are configured in target mode.


Environment



NetBackup appliances 5220 and 5230 working as Fibre Transport Media Servers.


Cause



If wrong ports are configured in target mode, backups to Fibre Transport Media Servers will fail with status 83.


Solution



Please see the attached document for a summary of which ports on the 5220 and 5230 appliances should be configured in target mode.

The following CLISH command on the appliance shows which ports are configured in target mode and which are in initiator mode:

Manage>FibreChannel (displayed as Manage>FC)

Manage>FC>show

Please also note that it is required to create separate zones for each set of SAN client and target port on the appliance which is to be used with the SAN client.


Attachments

ports to be used in target mode.docx (154 kBytes)


Article URL http://www.symantec.com/docs/TECH183718


Terms of use for this information are found in Legal Notices