support for multiple IP addresses of PXE server on DS7.1*

Article:TECH195998  |  Created: 2012-09-02  |  Updated: 2012-11-07  |  Article URL http://www.symantec.com/docs/TECH195998
NOTE: If you are experiencing this particular known issue, we recommend that you Subscribe to receive email notification each time this article is updated. Subscribers will be the first to learn about any releases, status changes, workarounds or decisions made.
Article Type
Technical Solution

Product(s)

Issue



Although it was possible for PXE Server to BIND multiple IP addresses in DS6.*.
 
Servicing multiple NICs using one PXE server
http://www.symantec.com/business/support/index?page=content&id=HOWTO2774
 
It is not so in DS7.1* as stated in following KB article:
 
PXE Services are binding to the incorrect NIC on a Deployment Server with multiple NICs
http://www.symantec.com/business/support/index?page=content&id=TECH165880
 
One is able to use only one IP address at certain time in PXE Server of DS7.1.

Solution



Configure IP address, to which PXE server BINDS, so that clients can access PXE server.




Article URL http://www.symantec.com/docs/TECH195998


Terms of use for this information are found in Legal Notices