Cannot Enter Passphrase Using USB Keyboard on Symantec Drive Encryption (formerly PGP Whole Disk Encryption) BootGuard

Article:TECH200001  |  Created: 2012-11-21  |  Updated: 2013-04-29  |  Article URL http://www.symantec.com/docs/TECH200001
NOTE: If you are experiencing this particular known issue, we recommend that you Subscribe to receive email notification each time this article is updated. Subscribers will be the first to learn about any releases, status changes, workarounds or decisions made.
Article Type
Technical Solution


Subject

Issue



When trying to authenticate, you are unable to enter your passphrase at the Symantec (formerly PGP) BootGuard screen using a USB keyboard.  Even though the keyboard may be connected directly to the computer or via a docking station, the passphrase is not input.

 


Cause



Normally, you need only be able to use a keyboard once Windows has loaded. Symantec BootGuard starts at a much earlier stage in the boot process and as a result the USB ports may not be fully active.


Solution



Restart the computer and enter the BIOS menu by using the built-in keyboard.  If the USB keyboard does not work in the BIOS menu then it is a reasonable assumption that it will not work at the Symantec BootGuard as well.

Many docking stations and some laptops will have a PS/2 connector.  If possible, use a PS/2 keyboard instead.

 

 




Article URL http://www.symantec.com/docs/TECH200001


Terms of use for this information are found in Legal Notices