Restore job from Deduplication folder fails with error "0xe000813c - The system cannot find the path specified"

Article:TECH209949  |  Created: 2013-08-26  |  Updated: 2013-08-26  |  Article URL http://www.symantec.com/docs/TECH209949
Article Type
Technical Solution


Issue



Restore job from Deduplication folder fails with error "0xe000813c - The system cannot find the path specified"


Error



Final error: 0xe000813c - The system cannot find the path specified.
Final error category: Backup Device Errors

For additional information regarding this error refer to link V-79-57344-33084

SGMON debug log during restore job shows following errors:


PVLSVR: [2940] DeviceIo: SCSI:
PVLSVR: [2940] DeviceIoScsi::TranslateGenError error 11
PVLSVR: [2940] DeviceIoScsiDrive::ReserveUnit[4]: DERROR_UNKNOWN_FAILURE(0x70000013) <-
PVLSVR: [2940] DeviceIoScsiDrive::TestUnitReady[4]: ->
PVLSVR: [2940] DeviceIo: 00:00:03:00 - NDMP device not connected or reservation conflict, SCSI cmd 00
PVLSVR: [2940] DeviceIo: SCSI: CDB 00:00:00:00 Start 13:35:17.339 End 13:35:17.339
PVLSVR: [2940] DeviceIo: SCSI: ASPI Status SCSI_COMPLETED_WITH_ERROR

Adamm.log shows following multiple entries:

[2940] DeviceIo: 00:00:03:00 - NDMP device not connected or reservation conflict, SCSI cmd 00
[2940] DeviceIo: 00:00:03:00 - NDMP device not connected or reservation conflict, SCSI cmd 00
[2940] DeviceIo: 00:00:03:00 - NDMP device not connected or reservation conflict, SCSI cmd 00
[2940] DeviceIo: 00:00:03:00 - NDMP device not connected or reservation conflict, SCSI cmd 00
[2940] DeviceIo: 00:00:03:00 - NDMP device not connected or reservation conflict, SCSI cmd 00
[2940] PvlDrive::DisableAccess() - ReserveDevice failed
       Drive = 1022 "Deduplication Storage Folder 0001:3"
       ERROR = 0x0000001F (ERROR_GEN_FAILURE) ->E_PVL_ERROR_PATH_NOT_FOUND


Environment



Backup Exec 2010 R3 SP3


Cause



Possible cause for this issue could be Device reservation conflict or NDMP device (Remote Agent Direct Access) connectivity issues


Solution



1. Restart the Backup Exec Remote Agent Service on Client Server which is being restored.
2. Restart the Backup Exec Services on Media Server
3. Retry the restore job

If the error continues even after the above steps are performed please contact technical support.


Supplemental Materials

SourceUMI
ValueV-79-57344-33084
Description

The system cannot find the path specified


SourceError Code
Value0xe000813c
Description

The system cannot find the path specified



Article URL http://www.symantec.com/docs/TECH209949


Terms of use for this information are found in Legal Notices