How to create a user-defined selection in Backup Exec for Windows Servers

Article:TECH23840  |  Created: 2003-01-23  |  Updated: 2014-09-24  |  Article URL http://www.symantec.com/docs/TECH23840
Article Type
Technical Solution

Product(s)

Issue



How to create a user-defined selection in Backup Exec for Windows Servers


Solution



User-defined selections can be used to create shortcuts to shares and save them as user-defined selections. This feature can be used to quickly access shares that have a very long path or that are unavailable when you are setting up a backup job. You can set up direct access to a share by entering its UNC path name or machine name. A share may be unavailable because the network resources used to locate the machine are offline, even though the machine may still be running and available. In some cases, this happens because the machine is on the internet and accessible from within the company's private network, but cannot be located using just its name or normal browsing methods.

To create a user-defined selection, do ONE of the following:
 
  • For Backup Exec 2012 and newer please refer to - Configuring share level backup jobs in Backup Exec 2012': 'http://www.symantec.com/docs/TECH189560
  • For Backup Exec 2010 R3 and earlier please proceed with the steps listed below:
 
1. Click on Backup tab (Figure 1):
 
Figure 1 
  
 
2. On the backup selections pane, locate and expand User -defined Selections
 
3. Right-click User-defined Selections, and then click Manage User-defined Selections (Figure 2). The User-defined Selections dialog box is displayed.
 
Figure 2
 

4. In the UNC Name box, type the server name and volume name (Figure 3):
 
Figure 3
  
 
Note: You can provide TCP/IP addresses for user-defined selections, but Symantec advises caution as IP addresses are always subject to change. Backup Exec does not support user-defined selections for IP addresses in a Dynamic Host Configuration Protocol (DHCP) environment.

5. Click Add (Figure 3). The share name is displayed in the Selections defined area of the dialog (Figure 4):

Figure 4
 

The selections that were specified can be selected for backup operations from the User-defined Selections node (Figure 5):

Figure 5
 



Legacy ID



254193


Article URL http://www.symantec.com/docs/TECH23840


Terms of use for this information are found in Legal Notices