Symantec Enabled Arrays - Array Support Library for Fujitsu ETERNUS4000 and ETERNUS8000 Arrays (Active/Active) on Veritas Volume Manager (tm) 5.0 for Solaris
| Article:TECH50134 | | | Created: 2006-01-15 | | | Updated: 2010-01-19 | | | Article URL http://www.symantec.com/docs/TECH50134 |
Problem
Symantec Enabled Arrays - Array Support Library for Fujitsu ETERNUS4000 and ETERNUS8000 Arrays (Active/Active) on Veritas Volume Manager (tm) 5.0 for Solaris
Solution
This TechFile provides information about the Array Support Library (ASL) for FUJITSU ETERNUS4000 and ETERNUS8000 Series arrays on Veritas Volume Manager (tm) 5.0 for Solaris.
For general information about ASLs, see TechNote 249446 (link in the Related Documents section of this TechFile)
Package Name: Array Support Library for Fujitsu ETERNUS4000/8000
Package Version: 1.0
Supported versions of Veritas Volume Manager: 5.0
Supported Arrays: Fujitsu ETERNUS4000 Series (Active/Active)
Fujitsu ETERNUS8000 Series (Active/Active)
Installation Instructions:
1. Create a directory to store the ASL package:
# mkdir /tmp/asl
# cd /tmp/asl
2. At the bottom of this TechFile, click on Download Now to download the ASL package
3. After downloading VRTSFJTSYe8k_v1_SunOS_50_286532.tar.Z, verify checksum of the file as follows:
# cksum VRTSFJTSYe8k_v1_SunOS_50_286532.tar.Z
928542150 9009 VRTSFJTSYe8k_v1_SunOS_50_286532.tar.Z
4. Uncompress the file and extract the package:
# uncompress VRTSFJTSYe8k_v1_SunOS_50_286532.tar.Z
# tar xvf VRTSFJTSYe8k_v1_SunOS_50_286532.tar
5. Before adding any ASL package, ensure Veritas Volume Manager is installed and enabled:
# vxdctl mode
mode: enabled
6. ASL Installation:
# pkgadd -d . VRTSFJTSYe8k
7. After the package is installed, run the vxdctl enable command to claim the disk array as a Fujitsu array:
# vxdctl enable
8. After running vxdctl enable, run the vxddladm listsupport and vxddladm listversion command and verify the output:
# vxddladm listsupport libname=libvxFJTSYe8k.so
ATTR_NAME ATTR_VALUE
==================================================
LIBNAME libvxFJTSYe8k.so
VID FUJITSU
PID All
ARRAY_TYPE A/A
ARRAY_NAME FJ_E4000, FJ_E8000
# vxddladm listversion libname=libvxFJTSYe8k.so
libvxFJTSYe8k.so has version string: vm-5.0-rev-1. VXVM version: 5.0
Package Information:
# pkginfo -l VRTSFJTSYe8k
PKGINST: VRTSFJTSYe8k
NAME: Array Support Library for Fujitsu ETERNUS8000/4000
CATEGORY: system
ARCH: sparc
VERSION: 1.0,REV=12.07.2006.19.04
BASEDIR: /etc/vx
VENDOR: Symantec
DESC: Array Support library for Fujitsu ETERNUS8000/4000
PSTAMP: VERSION-1.0:8-October-2006
INSTDATE: Mar 26 2009 20:00
HOTLINE: 800-342-0652
EMAIL: support@veritas.com
STATUS: completely installed
FILES: 5 installed pathnames
3 shared pathnames
3 directories
2 executables
16 blocks used (approx)
Attachments
|
|
|
Legacy ID
286532
Article URL http://www.symantec.com/docs/TECH50134
Terms of use for this information are found in Legal Notices









Thank you.