Veritas Provisioning Manager 5.0 - Patch 1-1084664
| Article:TECH52703 | | | Created: 2007-01-18 | | | Updated: 2008-01-17 | | | Article URL http://www.symantec.com/docs/TECH52703 |
Problem
Veritas Provisioning Manager 5.0 - Patch 1-1084664
Solution
Veritas
Provisioning Manager 5.0 Patch 1-1084664 is available. It addresses
following issues:
966545 - When a
Solaris Sparc target in a Disconnected state, you need to use the "Force to
Admin State" option to reboot the target into the Admin state. The "Reboot to
Admin" operation fails even when the force option is used for the Disconnected
targets. This issue has been fixed in the patch.
1043424 -
Deploying an image with concat-mirror layered volume (created with Storage
Foundation 4.1) on the same Solaris 10 x86 target with resize option fails with
internal error: V-234-581. This issue has been fixed in the patch. The patch
enables you to use the resize option with the Storage Foundation 4.1 images for
the Solaris 10 x86 targets.
1057156 -
Loading a SLES9 snapshot containing extended partitions results in Segmentation
fault. This issue has been fixed in the patch.
1060595 - The
Linux Active OS requires drivers for SATA drives available with the IBM x3455
system. The patch adds the required drivers for supporting IBM x3455 and hence
enables provisioning of IBM x3455 systems.
Installation:
It is
recommended that you install this patch after completing installation (or
upgrade) of Veritas Provisioning Manager 5.0.
Installation
steps:
1. Download the patch file to a temporary
directory.
2. Rename the patch file from
VPM-5.0+Patch1-1084664.tar_290045.gz to VPM-5.0+Patch1-1084664.tar.gz
3. Unzip the patch file:
2. Rename the patch file from
VPM-5.0+Patch1-1084664.tar_290045.gz to VPM-5.0+Patch1-1084664.tar.gz
3. Unzip the patch file:
#gzip -d
VPM-5.0+Patch1-1084664.tar.gz
4. Extract the patch file:
#tar xvf
VPM-5.0+Patch1-1084664.tar
5. Run
./installpatch.sh
The patch installation restarts the Provisioning Manager
server processes.
This patch installs a new version of the Linux ActiveOS. To use the fixes
provided in the new version of the ActiveOS, any assets that are in the
Admin state need to rebooted back into the Admin state.
Patch Rollback instructions
----------------------------
To remove this patch from the Provisioning Manager Server:
1. Change directory to:
<PRODUCT_DIR>/patches/VPM-5.0+patch1-1084664
2. Run ./removepatch.sh
This patch installs a new version of the Linux ActiveOS. To use the fixes
provided in the new version of the ActiveOS, any assets that are in the
Admin state need to rebooted back into the Admin state.
Patch Rollback instructions
----------------------------
To remove this patch from the Provisioning Manager Server:
1. Change directory to:
<PRODUCT_DIR>/patches/VPM-5.0+patch1-1084664
2. Run ./removepatch.sh
Attachments
|
|
Related Articles
Legacy ID
290045
Article URL http://www.symantec.com/docs/TECH52703
Terms of use for this information are found in Legal Notices
Thank you.