Symantec Enabled Arrays - Array Support Library (ASL) for the Pillar Data Axiom series arrays on Veritas Volume Manager 5.0 and later for Solaris (sparc)
| Article:TECH52906 | | | Created: 2007-01-01 | | | Updated: 2010-01-24 | | | Article URL http://www.symantec.com/docs/TECH52906 |
Problem
Symantec Enabled Arrays - Array Support Library (ASL) for the Pillar Data Axiom series arrays on Veritas Volume Manager 5.0 and later for Solaris (sparc)
Solution
This TechFile provides information about the Array Support
Library (ASL) for the Pillar Data Axiom series arrays on Veritas Volume Manager
5.0 and later for Solaris sparc 8, 9, 10
For general information about ASLs, see TechNote 249446 http://support.veritas.com/docs/249446
Package Name: VRTSPILLAR-Axiom
Package Version: 1.2,REV=03.21.2007.10.23
Supported Versions of Veritas Volume Manager: 5.0 and later
Supported Arrays: Pillar Data Axiom series arrays
Array Settings: A/P
Installation Instructions:
1. Create a directory to store ASL package:
# mkdir /tmp/asl
2. At the bottom of this TechFile, click on Download Now to download the package
3. Download the file VRTSPILLAR-Axiom into /tmp/asl directory
4. Before adding any ASL package, ensure Veritas Volume Manager is installed and enabled:
# vxdctl mode
mode: enabled
5. To install the package:
# cd /tmp/asl
# zcat VRTSPILLAR-Axiom_290328.tar.Z | tar xvf -
For general information about ASLs, see TechNote 249446 http://support.veritas.com/docs/249446
Package Name: VRTSPILLAR-Axiom
Package Version: 1.2,REV=03.21.2007.10.23
Supported Versions of Veritas Volume Manager: 5.0 and later
Supported Arrays: Pillar Data Axiom series arrays
Array Settings: A/P
Installation Instructions:
1. Create a directory to store ASL package:
# mkdir /tmp/asl
2. At the bottom of this TechFile, click on Download Now to download the package
3. Download the file VRTSPILLAR-Axiom into /tmp/asl directory
4. Before adding any ASL package, ensure Veritas Volume Manager is installed and enabled:
# vxdctl mode
mode: enabled
5. To install the package:
# cd /tmp/asl
# zcat VRTSPILLAR-Axiom_290328.tar.Z | tar xvf -
#
pkgadd -d VRTSPILLAR-Axiom
After the package is installed, you must run the vxdctl enable command to claim the disk array as a array:
# vxdctl enable
After running the vxdctl enable command, you should see libvxpillaraxiom.so in the output of the vxddladm listsupport command:
# vxddladm listsupport libname=libvxpillaraxiom.so
ATTR_NAME ATTR_VALUE
=======================================================================
LIBNAME libvxpillaraxiom.so
VID Pillar
ARRAY_TYPE A/P
ARRAY_NAME PILLAR-AXIOM
Package Information:
# pkginfo -l VRTSPILLAR-Axiom
PKGINST : VRTSPILLAR-Axiom
NAME : Array Support Library for Pillar Data Axiom series arrays
CATEGORY : system
ARCH : sparc
VERSION : 1.2,REV=03.21.2007.10.23
BASEDIR : /etc/vx
VENDOR : VERITAS Software
DESC : Array Support Library for Pillar Data Axiom series arrays
PSTAMP : VERSION-1.1:07-Feb-2007
INSTDATE : Aug 01 2007 13:35
HOTLINE : 800-342-0652
EMAIL : support@veritas.com
STATUS : completely installed
FILES : 5 installed pathnames
3 shared pathnames
3 directories
2 executables
27 blocks used (approx)
Attachments
|
|
Legacy ID
290328
Article URL http://www.symantec.com/docs/TECH52906
Terms of use for this information are found in Legal Notices
Thank you.