Veritas CommandCentral (TM) Storage 5.0 MP1 Rolling Patch 3 (RP3) for AIX

Article:TECH63293  |  Created: 2008-01-15  |  Updated: 2008-01-16  |  Article URL http://www.symantec.com/docs/TECH63293
Article Type
Technical Solution

Product(s)

Environment

Issue



Veritas CommandCentral (TM) Storage 5.0 MP1 Rolling Patch 3 (RP3) for AIX

Solution



Copyright (c) 2008 Symantec Corporation. All rights reserved. Symantec, the
Symantec Logo, and Veritas are trademarks or registered trademarks of Symantec
Corporation or its affiliates in the U.S. and other countries. Other names
may be trademarks of their respective owners.

The Licensed Software and Documentation are deemed to be commercial computer
software as defined in FAR 12.212 and subject to restricted rights as defined
in FAR Section 52.227-19 "Commercial Computer Software - Restricted Rights"
and DFARS 227.7202, "Rights in Commercial Computer Software or Commercial Computer
Software Documentation", as applicable, and any successor regulations. Any use,
modification, reproduction release, performance, display or disclosure of the
Licensed Software and Documentation by the U.S. Government shall be solely
in accordance with the terms of this Agreement.

*****************************************************************************
README for Veritas CommandCentral(TM) Storage Rolling Patch 3
Veritas CommandCentral Storage 5.0MP1
*****************************************************************************

Rolling Patch 3 for Veritas CommandCentral(TM) Storage 5.0MP1 (hereafter
5.0MP1-RP3) contains native operating system patches for all CommandCentral
Storage components since the 5.0MP1 release.

Apply this rolling patch only on hosts where CommandCentral Storage 5.0MP1,
5.0MP1-RP1, or 5.0MP1-RP2 has already been installed.

^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Header information
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

Synopsis:  Rolling Patch 3 for Veritas CommandCentral Storage 5.0MP1 by Symantec

ID#:       5.0MP1-RP3
Version#:  5.0.432.0 (Management Server)
          5.0.432.0 (Managed host)
    5.0.432.0 (Agent Push Install Utility)

Keywords:  CommandCentral Storage Management Server, CommandCentral Storage
          managed host, CommandCentral Storage Console, Agent Push Install
    Utility, Data Module, Monitoring

Date:      September 15, 2008

^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Table of contents
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

Section 1: System information
 1.A - Affected operating systems
 1.B - 5.0MP1-RP3 requirements/interoperability
 1.C - Executable and patch manifest
 1.D - Files added/modified

Section 2: Installation
 2.A - Install overview
 2.B - Windows
 2.C - UNIX
 2.D - Install confirmation

Section 3: Issues fixed

Section 4: Known issues/limitations

^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Section 1: System information
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

1.A. Affected operating systems
===============================
This rolling patch is for CommandCentral Storage components running on the
following operating systems:

- Windows

- Solaris

- HP-UX

- AIX

- Linux

1.B. 5.0MP1-RP3 requirements/interoperability
=============================================
- Patches required with this patch: None

- Patches that conflict with this patch: None

- Patches accumulated and made obsolete by this patch:

- NetApp Provider Hot Fix #1 (5.0MP1_RP2_NetApp_HF1)

- EMC Symmetrix Explorer Hot Fix #1 (5.0MP1_RP2_Symmetrix_HF1)

- SunVM Explorer Hot Fix #1 (5.0MP1_RP2_SunVM_HF1)

- VXAM Hot Fix #1 (5.0MP1_RP1_RP2_VxAM_HotFix1)

- CCSTOR_GUI - Hot Fix #2 (CCStorage_50_MP1_RP2_GUI_Hot_Fix2)

- CCSTOR_FC_AGENTS Hot Fix #1 (5.0MP1_RP2_Vmware_HF1)

- CISCO SWITCH EXPLORER Hot Fix #1 (5.0MP1_RP2_SNMPlib_HF1)

- Storage HBA Explorer binary Hot Fix #1 (5.0MP1_RP2_HBAExplorer_HF1)

- Infrastructure Hot Fix #1 (50MP1_RP2_HAL_Core_Hotfix)

1.C. Executable and patch manifest
==================================
This section lists (by operating system) the Windows executables and UNIX
patches that comprise CommandCentral Storage 5.0MP1-RP3.

Windows:

Management Server       MSSetup.exe
Managed host MHSetup.exe
Agent Push Install Utility PISetup.exe

Solaris:

VRTSCCSTS_SOLARIS_PATCH_ID=126886-05(MS)
VRTSCCSTW_SOLARIS_PATCH_ID=126888-05(MS)
VRTSCCSTA_SOLARIS_PATCH_ID=126887-05(MH)
VRTSSICLS_SOLARIS_PATCH_ID=127303-05
VRTSCCDB_SOLARIS_PATCH_ID=127304-05(MS)
VRTSHALR_SOLARIS_PATCH_ID=127305-05
VRTSHALT_SOLARIS_PATCH_ID=127306-05
VRTSHALFC_SOLARIS_PATCH_ID=127307-05
VRTSHALEN_SOLARIS_PATCH_ID=127308-05
VRTSHALA_SOLARIS_PATCH_ID=127309-05
VRTSHALH_SOLARIS_PATCH_ID=127310-05
VRTSHALM_SOLARIS_PATCH_ID=127311-05 (MS)
VRTSHALC_SOLARIS_PATCH_ID=127312-05 (MS)
VRTSAMCCS_SOLARIS_PATCH_ID=127314-05(MS)
VRTSAS_SOLARIS_PATCH_ID=127315-05   (MS)
VRTSCCIMP_SOLARIS_PATCH_ID=127316-05(MS)
VRTSOBC33_SOLARIS_PATCH_ID=122632-08
VRTSTRAP_SOLARIS_PATCH_ID=127313-05(MS)
VRTSCCDAM_SOLARIS_PATCH_ID=126889-05
VRTSWEB_SOLARIS_PATCH_ID=137356-01(MS)

HP-UX:

VRTSccsta: PVCO_03833
VRTSsicls: PVCO_03834
VRTSccdam: PVCO_03835
VRTShalA:  PVCO_03836
VRTShalFC: PVCO_03837
VRTShalH:  PVCO_03838
VRTShalR:  PVCO_03839
VRTShalT:  PVCO_03840
VRTShalen: PVCO_03841
VRTSobc33: PHCO_38382

AIX:

---------------------------------------------------
Note: Patches have same name as base (5.0) package.
---------------------------------------------------

VRTShalA.array
VRTShalFC.fc
VRTShalH.host
VRTShalR.rte
VRTShalT.tools
VRTShalen.cat_en
VRTSsicls.sicls
VRTSccsta.ccsta
VRTSccdam.ccdam
VRTSobc33

Linux:

---------------------------------------------------
Note: Patches have same name as base (5.0) package.
---------------------------------------------------

VRTShal-cat_en-5.0.3289.0-50MP1_RP3
VRTShal-tools-5.0.3289.0-50MP1_RP3
VRTShal-fc-5.0.3289.0-50MP1_RP3
VRTSccdam-5.00.0896.0-50MP1_RP3
VRTShal-5.0.3289.0-50MP1_RP3
VRTShal-array-5.0.3289.0-50MP1_RP3
VRTShal-host-5.0.3289.0-50MP1_RP3
VRTSsicls-5.00.0381.0-50MP1_RP3
VRTSccsta-5.0.289.0-50MP1_RP3
VRTSobc33-3.3.921.0-0

1.D. Files modified/added
==========================
For a list of the files that are added/modified in 5.0MP1-RP3, locate and
uncompress the following files:

Windows - List_of_files_changed_for_MP1_RP3_on_Windows.zip

UNIX - List_of_files_changed_for_MP1_RP3_on_unix.tar.gz

^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Section 2: Installation
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

This section describes how to install this rolling patch.

2.A - Install overview
======================
You should apply 5.0MP1-RP3 to your Management Server host and to all of your
managed hosts. If you plan to use the Agent Push Install Utility on Windows to
install the managed host, you should apply 5.0MP1-RP3 to the host where the
utility is installed *before* you use the utility to install the managed host
on remote hosts.

Installation order should be as follows:

1. Install 5.0MP1-RP3 on your Management Server host.

2. If you are using the Agent Push Install Utility on Windows, install 5.0MP1-RP3
  on the host where the utility is installed.

3. Install 5.0MP1-RP3 on your managed hosts.

2.B - Windows
=============
For Windows, the following files are available for 5.0MP1-RP3:

===============================================================================
File                     For installing 5.0MP1-RP3 on. . .
===============================================================================
MSSetup.exe              Management Server host
-------------------------------------------------------------------------------
MHSetup.exe              Managed host
-------------------------------------------------------------------------------
PISetup.exe              Agent Push Install Utility host
===============================================================================

1. On the host where you want to install 5.0MP1-RP3, download and unzip the
  .zip file that contains the 5.0MP1-RP3 executables.

  By default, the 5.0MP1-RP3 files unzip into a ccstor_50MP1_RP3 directory.

2. From the ccstor_50MP1_RP3 directory, double-click the executable file for the
  component that you want to update.

3. Follow the install wizard prompts.

Log locations:

Install log:
%ALLUSERSPROFILE%\Application Data\VERITAS\CommandCentral Storage\CCS50RP.log

Uninstall log:
%ALLUSERSPROFILE%\Application Data\VERITAS\CommandCentral Storage\CCStorageInstall.log

Database patching log:
%ALLUSERSPROFILE%\Application Data\VERITAS\CommandCentral Storage\Dbupgrade50Patch.log

2.C - UNIX
==========
For UNIX, the following files are available for 5.0MP1-RP3:

===============================================================================
File For installing 5.0MP1-RP3 on. . .
===============================================================================
CCStor_50MP1_RP3_SunOS.tar.Z Solaris Management Server and managed hosts
-------------------------------------------------------------------------------
CCStor_50MP1_RP3_HPUX.tar.Z HP-UX managed hosts
-------------------------------------------------------------------------------
CCStor_50MP1_RP3_AIX.tar.Z AIX managed hosts
-------------------------------------------------------------------------------
CCStor_50MP1_RP3_Linux.tar.Z Linux managed hosts
===============================================================================

1. Download the files that you need and uncompress them as follows:

  - `uncompress CCStor_50MP1_RP3_<PLAT>.tar.Z`
 
     (outcome of the above command will be CCStor_50MP1_RP3_<PLAT>.tar)

  - `tar -xf CCStor_50MP1_RP3_<PLAT>.tar`

  By default, the files are uncompressed to a CCStor_50MP1_RP3 directory.

2. Copy or mount the CCStor_50MP1_RP3 directory on the target host.

3. Run ./installrp from the CCStor_50MP1_RP3 directory.

4. Follow the install script prompts.

  The installer displays the path to all logs at the end of the install.

2.D - Install confirmation
==========================
After you install CommandCentral Storage 5.0MP1-RP3, you can verify that all
patches and files have been added/modified by confirming that your host has
been updated as described below.

Windows:

After you install CommandCentral Storage 5.0MP1-RP3, the entry in Add or Remove
Programs will be listed as follows:

- "Veritas CommandCentral(TM) Storage 5.0MP1 Rolling Patch 3 by Symantec"

Solaris:

Product version will remain as Veritas CommandCentral Storage 5.0 by Symantec.
However, PSTAMP will contain 50MP1_RP3 entry for all patches.

HP-UX:

(Check with `swlist | grep PVCO`)

VRTSccsta: PVCO_03833
VRTSsicls: PVCO_03834
VRTSccdam: PVCO_03835
VRTShalA:  PVCO_03836
VRTShalFC: PVCO_03837
VRTShalH:  PVCO_03838
VRTShalR:  PVCO_03839
VRTShalT:  PVCO_03840
VRTShalen: PVCO_03841

(For OBC33, check with `swlist | grep PHCO`)

VRTSobc33: PHCO_38382

AIX:

VRTShalA.array       5.0.3289.0
VRTShalFC.fc         5.0.3289.0
VRTShalH.host        5.0.3289.0
VRTShalR.rte         5.0.3289.0
VRTShalT.tools     5.0.3289.0
VRTShalen.cat_en     5.0.3289.0
VRTSsicls.sicls     5.0.5.0
VRTSccsta            5.0.5.0
VRTSccdam            5.0.5.0
VRTSobc33            3.3.721.197

Linux:

VRTShal-cat_en       5.0.3289.0-50MP1_RP3
VRTShal-tools        5.0.3289.0-50MP1_RP3
VRTShal-fc           5.0.3289.0-50MP1_RP3
VRTSccdam            5.00.0896.0-50MP1_RP3
VRTShal              5.0.3289.0-50MP1_RP3
VRTShal-array        5.0.3289.0-50MP1_RP3
VRTShal-host         5.0.3289.0-50MP1_RP3
VRTSsicls            5.00.0381.0-50MP1_RP3
VRTSccsta            5.0.289.0-50MP1_RP3
VRTSobc33            3.3.921.0-0

^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Section 3: Issues fixed
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

3.A - Management Server
=======================

The following fixed issues affect the Management Server:

===============================================================================
Incident Description
===============================================================================
1204209 When switch port and HBA port connections are disconnected in
the network, the Console displays the wrong connectivity
information for the HBA port
-------------------------------------------------------------------------------
1250002 Monitoring for Brocade switches with version 6.x.x firmware
does not work
-------------------------------------------------------------------------------
1264823 Ensure the correct Topology Map displays for the fabrics that
contain Cisco virtual switches
-------------------------------------------------------------------------------
1274663 Sybase instances display as discovered with data even though
there are no databases discovered under that instance
-------------------------------------------------------------------------------
1277349 In a switches Overview pane, the Slots table displays the
wrong number of free ports
-------------------------------------------------------------------------------
1279760 Used Logical capacity not available for NetApp aggregates
-------------------------------------------------------------------------------
1280036 A policy with scoped objects of the type Brocade ISL do not work
-------------------------------------------------------------------------------
1280751 Ensure the Switch Port Usage Summary report displays only used
ports
-------------------------------------------------------------------------------
1282402 For SMI-S managed IBM DS storage arrays, in the Connectivity
pane, the Storage Views table does not display the storage views
for which the array virtual port is associated
-------------------------------------------------------------------------------
1284486 Improved load time for the global Topology Map and array
Topology Map
-------------------------------------------------------------------------------
1285266 The Central HAL Manager (CHM) stops if the event handling queue
fills up
-------------------------------------------------------------------------------
1285297 Improved explorer configuration tuning and fixed performance
issues in triggers and stored procedures to make data collection
faster
-------------------------------------------------------------------------------
1286312 In the Managed Hosts table, the Managed Host Configuration
column does not display information for some managed hosts
-------------------------------------------------------------------------------
1290411 Storage reports do not include the storage that is consumed by
file systems present on EMC PowerPath Meta OS handles
-------------------------------------------------------------------------------
1293170 Discovery fails for IBM DS8000 storage array volumes that have
the Configuration State field set as "Configuration Error"
-------------------------------------------------------------------------------
1295392 The VMware explorer does not create an ESX server object after
it is configured
-------------------------------------------------------------------------------
1295433 Monitoring does not start after migration from 4.x to 5.x
-------------------------------------------------------------------------------
1297155 In the Diagnostics pane, ensure that the version displays for
HALCHM
-------------------------------------------------------------------------------
1301357 The Storage Consumption report counts file system capacities
multiple times when there are multiple mount points for a file
system
-------------------------------------------------------------------------------
1301981 The HP EVA explorer fails to discover the names of storage
arrays that have spaces in their name
-------------------------------------------------------------------------------
1303594 In the Storage Capacity Detail report, when aggregates and flex
volumes are configured in NetApp unified storage devices, the
Physical Disks table includes redundant rows
-------------------------------------------------------------------------------
1315791 After clicking a qtree, the error "Unhandled Exception:
class java.lang.NullPointerException" displays
-------------------------------------------------------------------------------
1317036 Enhance consistency to discover Cisco switches
-------------------------------------------------------------------------------
1317167 When viewing a switches Connectivity tab, in the Ports table,
the Connected To objects incorrectly display nodes as
unidentified adapters
-------------------------------------------------------------------------------
1318206 The topology for a host displays the array's serial number
instead of the array's name
-------------------------------------------------------------------------------
1320075 Correct the issue where the Console allows adding an NT domain
user multiple times when assigned different roles
-------------------------------------------------------------------------------
1320122 User created attributes not visible in the table settings for
all objects other than storage arrays and NetApp unified storage
devices
-------------------------------------------------------------------------------
1320284 After upgrading to 5.0 MP1-RP2, race condition in the Central
HAL Manager (CHM) may cause core dump at startup
-------------------------------------------------------------------------------
1323443 Increase in CPU consumption due to large number of alerts
-------------------------------------------------------------------------------
1323894 If the vendor's CLI masking output has a device list that
spans multiple lines, the device's masking status may display
as unmasked
-------------------------------------------------------------------------------
1362339 After renaming an HP EVA storage array, discovery of that array
fails
-------------------------------------------------------------------------------
1364105 In the Task Status pane, clicking an object in the Task
Summary table displays an error
-------------------------------------------------------------------------------
1365053 For MS SQL instances with the cluster resource type SQL Server,
in the Clustered MS SQL Summary table, data does not display in
the Application Name column
-------------------------------------------------------------------------------
1365902 Add support for Hitachi Workgroup Modular Storage (WMS) arrays
-------------------------------------------------------------------------------
1366344 Add support for EMC CLARiiON RAID 6 discovery
-------------------------------------------------------------------------------
1367988 When the Auto Refresh option is enabled, the Console ignores
the session timeout value
-------------------------------------------------------------------------------
1369526 A non-administrator user can delete ad hoc reports that an
administrator creates even when the user does not have the
right to delete ad hoc reports
-------------------------------------------------------------------------------
1370566 For Cisco switches that are configured as SNMP version 3 and
do not allow communication using SNMP version 1, in the
Monitoring tab, port utilization for Cisco ports display as 0%
-------------------------------------------------------------------------------
1370570 For Cisco switches that are configured as SNMP version 3 and
do not allow communication using SNMP version 1, Switch Port
performance reports do not display
-------------------------------------------------------------------------------
1370681 After upgrade to 5.0 MP1-RP2, performance monitoring for HDS
arrays does not work
-------------------------------------------------------------------------------
1372046 The Database Cleanup Task needs to run at a higher priority
-------------------------------------------------------------------------------
1372160 Improve the performance of DT processing, which improves the
Management Server's ability to process updates from managed
hosts
-------------------------------------------------------------------------------
1373334 Clicking on an object in the Quotas table incorrectly loads the
quota instead of the volume or qtree
-------------------------------------------------------------------------------
1375556 The LUN Query Tool incorrectly lists all un-masked and un-bound
LUNs as Unused LUNS
-------------------------------------------------------------------------------
1377606 Improve the minimum load time to import information, which
improves the Management Server's ability to process updates
from managed hosts
-------------------------------------------------------------------------------
1378923 Monitoring for Brocade Router switches with 7.x.x firmware
versions does not work
-------------------------------------------------------------------------------
1379513 Probe Device returns inappropriate error message when using
wrong credentials for switches
-------------------------------------------------------------------------------
1380189 Polices that don't have defined collectors throw exceptions in
the Console
-------------------------------------------------------------------------------
1383084 Ensure that information about Veritas Volume Manager volumes
appears in a host's object dependency group
-------------------------------------------------------------------------------
1383149 Ensure that EMC PowerPath LUNs display in the LUNs table
-------------------------------------------------------------------------------
1385581 The Console displays an error in the Policy Overview panel when
a policy name contains a #
-------------------------------------------------------------------------------
1386704 Correct the error that displays when clicking a Microsoft
Exchange Server storage group
-------------------------------------------------------------------------------
1386990 Port speed shows incorrect information for 8GB switches
-------------------------------------------------------------------------------
1387378 CIMVAIL explorer crash in 5.0 MP1-RP2
-------------------------------------------------------------------------------
1392277 In Internet Explorer, if the Display Script Error option is
enabled, a Java Script error displays in the Console when
viewing a table
-------------------------------------------------------------------------------
1392544 A user with the Administrator role cannot assign the right to
create, modify, and delete ad hoc reports to another role
-------------------------------------------------------------------------------
1393652 On Solaris hosts, monitoring does not work during upgrade from
4.3 to 5.0 MP1-RP2, because the latest VRTStrap patch failed to
install
-------------------------------------------------------------------------------
1393743 Ensured that all objects in a host's object dependency group
display, as only volumes consumed by applications were included
in the object dependency group
-------------------------------------------------------------------------------
1396082 Enhance performance of McDATA switch discovery via SMI-S
-------------------------------------------------------------------------------
1407845 After upgrade to 5.0 MP1-RP2, scheduled tasks no longer appear
in the Console
===============================================================================


3.B - managed host
==================

The following fixed issues affect the managed host:

===============================================================================
Incident Description
===============================================================================
1235310 Corrected issue where a volume's capacity for Compaq JBODs
would display with a negative number
-------------------------------------------------------------------------------
1285304 Reduced message logging severity from ERROR to STATUS for some
virtual machine CLIs
-------------------------------------------------------------------------------
1285637 Due to memory leaks, the memory consumption of application
explorers might increase
-------------------------------------------------------------------------------
1288261 Improve ability to discover MS SQL 2000 instances and ability
to discover MS SQL 2000 and 2005 instances installed on the
same host
-------------------------------------------------------------------------------
1295856 The command "halagentcfg stop-all" leaves stray HAL processes
on UNIX hosts
-------------------------------------------------------------------------------
1298100 For Solaris hosts, add MPxIO discovery
-------------------------------------------------------------------------------
1300186 File system to EMC PowerPath OS handle correlation fails
-------------------------------------------------------------------------------
1301070 Ifrepair job must not restart LHM when SVCDefaults.cfg sets
ORBEndpointHostname
-------------------------------------------------------------------------------
1302360 When the storage explorer runs on a guest OS, the guest OS may
hang
-------------------------------------------------------------------------------
1303175 SunVM explorer crashes when Sun Soft Partitions sit on top of
mirrored Sun Volumes
-------------------------------------------------------------------------------
1315877 The Local HAL Manager (LHM) will not start if its configuration
file is empty or missing
-------------------------------------------------------------------------------
1317018 After silent install of 5.0 MP1 on Windows, upgrades to MP1-RP1
and MP1-RP2 do not display in Add/Remove programs
-------------------------------------------------------------------------------
1317636 Add support for Red Hat Linux 5.0 (see the CommandCentral
Storage Hardware and Software Compatibility List for more
information)
-------------------------------------------------------------------------------
1362500 On an ESX server with Kernel 2.4, warning messages from an
Emulex HBA driver display in the system logs due to unsupported
IOCTLs for SCSI drivers
-------------------------------------------------------------------------------
1362802 Corrected behavior of the Symantec Private Branch Exchange (PBX)
so that it does not create a service group in a Microsoft Cluster
Server cluster
-------------------------------------------------------------------------------
1371417 IP address of Windows 2003 and above hosts do not display and
all device handles display as undiscovered
-------------------------------------------------------------------------------
1373220 Ensure that Hardware Abstraction Layer (HAL) upgrade supports
multiple explorers of a given type
-------------------------------------------------------------------------------
1381491 Installing the managed host with the Push Install Utility fails
and creates a file named "Program" in the root drive
-------------------------------------------------------------------------------
1382676 Ensure that the command "halagentcfg stop-all" does not stop
perl scripts for configuring and restarting the Hardware
Abstraction Layer (HAL)
-------------------------------------------------------------------------------
1388247 In a Microsoft Cluster Server cluster, the Local HAL Manager
(LHM) may hang when an application moves from one node to
another
-------------------------------------------------------------------------------
1392689 CommandCentral Storage may not discover all the soft links to
device handles on a Linux host that includes a large number of
LUNs
===============================================================================


3.C - Management Server and managed host
========================================

The following fixed issues affect both the Management Server and managed host:

===============================================================================
Incident Description
===============================================================================
1214933 Some Solaris operating system patches (Solaris 8 with patch
109147-36 through 109147-39 and without patch 109147-40;

Solaris 9 with patch 112963-21 through 112963-24 and without
patch 112963-25;
Solaris 10 with patch 117461-03 through
117461-07 and without patch 117461-08) cause the host explorer
to stop working
-------------------------------------------------------------------------------
1302073 HAL process (halrun) crashes when cached credentials are invalid
-------------------------------------------------------------------------------
1304084 Stopping the Private Branch Exchange (PBX) and then running the
command "vxccs status" causes HAL process (halrun) to fail
-------------------------------------------------------------------------------
1367119 Uninstallation does not complete when the unconfiguration
script is terminated prematurely
-------------------------------------------------------------------------------
1390401 When IP addresses change, the command "halagentcfg" might report
that the Local HAL Manager (LHM) and explorers are hung
===============================================================================

^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Section 4: Known issues/limitations
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

4.A - Windows
=============

1. Installation of 5.0 MP1-RP3 is not supported on Windows Server 2008 hosts with
  64-bit domain controllers.

2. On Windows Server 2008 hosts, the Array Management and NetApp Unified Storage Discovery
  capabilities are not supported. You can install these capabilities, but they will
  not function. If you do not install these capabilities, when you upgrade to a later
  version of CommandCentral Storage, you will not have the option to enable these
  capabilities.

  If you might use these capabilities in a later version of CommandCentral Storage,
  we recommend that you install them in 5.0 MP1-RP3.

  If you need to use these capabilities for 5.0 MP1-RP3, install the managed host on
  a host that does not have the Windows Server 2008 operating system. For more information
  about supported operating systems, refer to the CommandCentral Storage Release Notes.

  Product documentation is available on the Symantec Technical Support web site:

   http://www.symantec.com/business/support/documentation.jsp?pid=50379

3. On 64-bit Windows Server 2008 hosts, the Data Module is not supported. You can install
  this module, but it will not function. If you do not install this module, When you
  upgrade to a later version of CommandCentral Storage, you will not have the option to
  enable the module.

  If you might use the Data Module in a later version of CommandCentral Storage, we
  recommend that you install the module in 5.0 MP1-RP3.

  If you need to use the Data Module for 5.0 MP1-RP3, we recommend that you install the
  managed host on a host that does not have the 64-bit Windows 2008 operating system.
  For more information about supported operating systems, refer to the CommandCentral
  Storage Release Notes.

  Product documentation is available on the Symantec Technical Support web site:

   http://www.symantec.com/business/support/documentation.jsp?pid=50379

4. After you install MP1-RP3 on an Agent Push Install Utility host, when you use the
  Agent Push Install Utility to install or upgrade a managed host on a Windows Server
  2008 host, the following message may display:

    Error: 127, Could not load dll, \\<host_name>\C$\Windows\system32\msi.dll
    CommandCentral Push Install Utility is unable to locate Windows Installer on the host.
    Installation process might fail.

  You can ignore this message and proceed with installation.


4.B - UNIX
==========

1. On Red Hat Linux 5.0 hosts, the Array Management and NetApp Unified Storage Discovery
  capabilities are not supported. You can install these capabilities, but they will
  not function. If you do not install these capabilities, when you upgrade to a later
  version of CommandCentral Storage, you will not have the option to enable these
  capabilities.

  If you might use these capabilities in a later version of CommandCentral Storage,
  we recommend that you install them in 5.0 MP1-RP3.

  If you need to use these capabilities for 5.0 MP1-RP3, install the managed host on
  a host that does not have the Red Hat Linux 5.0 operating system. For more information
  about supported operating systems, refer to the CommandCentral Storage Release Notes.

  Product documentation is available on the Symantec Technical Support web site:

   http://www.symantec.com/business/support/documentation.jsp?pid=50379


Attachments

CCStor_50MP1_RP3_AIX_308521.tar.Z (380.1 MBytes)

Legacy ID



308521


Article URL http://www.symantec.com/docs/TECH63293


Terms of use for this information are found in Legal Notices