Veritas Cluster Server 5.0 Maintenance Pack 3 (MP3) Hot Fix 1 (HF1) for Solaris (SPARC)

From the README in the tarball:

Date: 2008-10-17
OS: Solaris Sparc
OS Version: 8, 9, 10
Packages: VRTSvcs
Etrack Incidents: 1404384,1397692
=========================================================================
* * * READ ME - VERITAS CLUSTER SERVER 5.0 MP3 - VCS Engine HOT FIX * * *

                  Patch Date:  October 17, 2008

This document provides information for:
   * POINT PATCH NAME
   * BEFORE GETTING STARTED
   * POINT PATCH SUMMARY OF CONTENT
   * PACKAGES AFFECTED BY PATCH
   * PATCH'S BASE VERSION
   * SUPPORTED OPERATING SYSTEMS
   * LIST OF INCIDENTS FIXED BY PATCH
   * INSTALLING THE PATCH
   * REMOVING THE PATCH

POINT PATCH NAME
----------------
Name: VCS50MP3HF1

BEFORE GETTING STARTED
----------------------

This patch is for systems running VCS 5.0 MP3 only. If systems are
running VCS 5.0MP1 or earlier, you do not need this patch.

POINT PATCH SUMMARY OF CONTENT
------------------------------
This point patch contains:

   README (this file)

   139151-01 for 2.8
   139152-01 for 2.9
   139153-01 for 2.10

PACKAGES AFFECTED BY PATCH
--------------------------
   VRTSvcs

PATCH'S BASE VERSION
--------------------
   VCS 5.0 MP3

SUPPORTED OPERATING SYSTEMS
---------------------------
   Solaris 8, 9, 10

LIST OF INCIDENTS FIXED BY PATCH
--------------------------------
1404384: HAD crashing when switching over a global group when PreSwitch is TRUE.

1397692: VCS engine clients hang in connect() if the target system is down.

INSTALLING THE PATCH
-------------------------------------------------------------------------------
1.  Copy the point patch to a directory on your system:

       # cp <patch.gz> .

2.  Unzip the compressed patch files that you want to install:

       # gunzip *.gz

3.  Extract the compressed patch files from the tar files:

       # tar -xvf <patch.tar>

4.  Verify that /opt/VRTS/bin is in your PATH so you can execute all the
   product commands. Refer to the VCS Installation Guide for more
   information.

5.  Verify that the version of VRTSvcs is 5.0 MP3.
   On each system, type:

       # pkginfo -l VRTSvcs
   Output should resemble the following:
  PKGINST:  VRTSvcs
     NAME:  Veritas Cluster Server by Symantec
 CATEGORY:  system
     ARCH:  sparc
  VERSION:  5.0
  BASEDIR:  /
   VENDOR:  Symantec Corporation
     DESC:  Veritas Cluster Server by Symantec
   PSTAMP:  Veritas-5.0MP3-08/29/08-16:43:00
 INSTDATE:  Oct 17 2008 11:44
   STATUS:  completely installed
    FILES:      174 installed pathnames
                 24 shared pathnames
                  4 linked files
                 50 directories
                 88 executables
             148874 blocks used (approx)

6. Stop the cluster on all nodes. If the cluster is writable, you may
  close the configuration before stopping the cluster.

       # haconf -dump -makero

  From one node, execute the following command.

       # hastop -all -force

  Verify that the cluster is stopped on all nodes
  by running the ha command.

       # hasys -state

  On all nodes, make sure that both had & hashadow processes are stopped.
  Also, stop the VCS CmdServer on all nodes.
  Determine the PID of the CmdServer and enter:
       # kill -9 <PID>

7. Change directory to the patch location.

8. On each node in the cluster, install the patch that corresponds to the
  version of the operating system running:
       # cd patches
       # patchadd <patch_id>

       For Solaris 8, install patch 139151-01.
       For Solaris 9, install patch 139152-01.
       For Solaris 10, install patch 139153-01.
   Output resembles (for Solaris 9):
       Checking installed patches...
       Executing prepatch script...
       Verifying sufficient filesystem capacity (dry run method)...
       Installing patch packages...
       /var/sadm/pkg
       Patch number 139152-01 has been successfully installed.
       See /var/sadm/patch/139152-01/log for details
       Patch packages installed:
         VRTSvcs

9.  After installation is complete, verify that the patch has been installed.
  On each system, type:
       # showrev -p | grep <patch_id>
   The information displayed after successful installation resembles the
   following (Solaris 9 example):

       # showrev -p | grep 139152-01
       Patch: 139152-01 Obsoletes:  Requires: 123209-03 Incompatibles:  Packages: VRTSvcs

10. At this time, you can start cluster services on all cluster nodes.
   On one node, please verify that VCS configuration is valid.

       # hacf -verify config

   If the configuration is valid, start VCS:

       # hastart

   On all other nodes, start VCS by issuing hastart once the
   first node goes to LOCAL_BUILD or RUNNING state.

REMOVING VCS PATCH
----------------------------------------------------------------
To remove the patch from a running VCS cluster:

1.  Perform step 6 from INSTALLING THE PATCH procedure.

2.  On each node in the cluster, type the following command:

       # patchrm <patch_id>
3.  Verify that the patch has been removed from each system.
   For example, on a Solaris 8 machine, type:
       # showrev -p | grep 139151

       It should not list the patch on this system.

4. Restart the cluster by following step 10 from INSTALLING THE PATCH
  procedure.


--------------------------------------------------------------------------------------------------------------------------

Tarball instructions


# cksum vcs-sol_sparc-5.0MP3HF1-patches.tar_311938.gz
1455832395      53810534        vcs-sol_sparc-5.0MP3HF1-patches.tar_311938.gz


Uncompress and untar:
# gunzip vcs-sol_sparc-5.0MP3HF1-patches.tar_311938.gz
# tar xvf vcs-sol_sparc-5.0MP3HF1-patches.tar_311938