NetBackup with the BMR option
Most Popular | Most Recent
Version : Environment :
BMR restores fail for backups taken after 7th September, 2014 when using non-Windows Master Servers
Doc. ID: TECH224758 | 2014-09-30
BMR - attempts to manually edit SRT results in bmrsrtadm fault
Doc. ID: TECH223998 | 2014-09-02
After a successful NetBackup Bare Metal Restore (BMR) recovery of a Windows client, DVD/CD-ROM Drive Letter may change.
Doc. ID: TECH224249 | 2014-09-01
After a successful Bare Metal Restore of a Windows client, size of the end partition on disks is reduced by one cylinder length.
Doc. ID: TECH224250 | 2014-08-31
After a successful NetBackup Bare Metal Restore (BMR) recovery of a Windows client, A Windows Error Recover Screen is presented.
Doc. ID: TECH224248 | 2014-08-31
Requirements for Bare Metal Restore (BMR) Boot Servers
Doc. ID: TECH87607 | 2014-08-27
The error message "Device or resource busy while trying to open /dev/sdX#" is displayed during the first reboot after Bare Metal Restore.
Doc. ID: TECH223806 | 2014-08-18
Support for system recovery where OS file systems reside on one of the disks enabled with BMR supported multipath environments. This multi-path enabled disk can be either local disk or SAN Lun.
Doc. ID: TECH214071 | 2014-08-14
Bare Metal Restore (BMR) recoveries to disks using Advanced Format (AF) technology fail to partition the disk.
Doc. ID: TECH216594 | 2014-08-13
Creating logical volume never completes on RHEL6.2 client during BMR recovery time.
Doc. ID: TECH192369 | 2014-08-11
After a successful Bare Metal Restore (BMR) recovery of a Linux client, the client is not able to boot from the original boot disk due to a change in the BIOS device name order.
Doc. ID: TECH179053 | 2014-07-31
In NetBackup 7.6.0.x, P2V conversion jobs using Bare Metal Restore (BMR) may fail with Status 7 when the VMWare dataStore is incorrectly selected.
Doc. ID: TECH222564 | 2014-07-30
P2V conversion job submission using "nbrestorevm" CLI fails with error message "Invalid Datastore selected for restore:
Doc. ID: TECH222850 | 2014-07-30
When Bare Metal Restore (BMR) is configured with NetBackup Access Control (NBAC), a BMR restore may fail with "bpnbat –login command failed" displayed, even when correct information has been provided.
Doc. ID: TECH222370 | 2014-07-30
Performing Physical to Virtual (P2V) restores using BMR
Doc. ID: TECH211500 | 2014-07-23
How to edit a BMR Point in Time configuration (or why is 'change' greyed out?)
Doc. ID: TECH213363 | 2014-06-26
Restoring an AIX client using Bare Metal Restore (BMR) option to NetBackup
Doc. ID: TECH130538 | 2014-06-18
Clients not showing up in Bare Metal Restore VM Conversion Clients list
Doc. ID: TECH218437 | 2014-06-17
BMR boot server upgrade to 126.96.36.199 does not clean-up existing Windows PreInstall 2.1 images
Doc. ID: TECH215828 | 2014-06-09
BMR based restore of RHEL 6.x client may complete with Status code 1 (partially successful)
Doc. ID: TECH215943 | 2014-05-21