If you don’t have to obtain and install from the following link
Download WinPE: https://www.microsoft.com/en-us/download/details.aspx?id=30652
copype.cmd x86 C:\winpe
copype.cmd amd64 C:\winpe
Above Commands creates the windows PE Image at C:\winpe
To install SEE Tools
From computer running Drive Encryption, copy the following files and paste them to c:\eede folder ( Create eede folder in C: Drive If You Can't Fine It )
Make the winpe folder your current working directory using the following command
cd c:\winpe
https://support.symantec.com/en_US/article.TECH223783.html
eedpe.bat winpe.wim c:\eede
Overwrite the old boot.wim file.
To do this Run Following Command
Xcopy /y c:\winpe\winpe.wim c:\winpe\media\sources\boot.wim
Run the following command to create ISO
MakeWinPEMedia /UFD C:\WinPE E: (Where E: is USB Drive )
Press Enter
Press Y and Enter
Done, be patient It will take some time.
Verify the working of the bootable disk via booting from it once.
Hi,
I have problem with step 5. - Cant find winpe.wim
I test create recovery iso on Windows 10.
Thank you
Had the same issue and what eventually had worked for me is:
1. copy all files of the "c:\Program Files\Symantec\Endpoint Encryption Clients\Drive Encryption" to the root of the "C:\eede" (not the subfolder)
2. Run the "eedpe.bat winpe.wim c:\eede" command in the command prompt which was "ran as Administrator"
thats correct.
That means we need 2 recovery disks for each OS 1 for 32bit and 1 for 64bit?
its required for the per OS
Hi Guys,
When creating a WinPE image for system recovery, do we have to create individual images for each and every PC or only for OS versions? For an instance let's say we have 12 PCs as described below.
2 - windows 10 64bit
2 - windows 10 32bit
2 - windows 8.1 64bit
2 - windows 8.1 32bit
2 - windows 7 64bit
2 - windows 7 32bit
Do we have to make 12 images or 6 images as in 2 images for every OS(64bit and 32bit)?
on step 4 I keep getting the following error
An error occurred while processing your request.
Reference #50.8d7bfea5.1470760277.27e5fac8
I am following the steps and it's not working. I'm trying to figure out why.
I think You Should try it on a different machine, and kindly verify the working. :)
It works fine for me you just need to follow the steps and you are good to go
I've tried using a different Windows ADK and now when running the eedpe.bat winpe.wim c:\eede command.
The error is "c:\eede is missing some crucial program files needed for recvoery"
I've checked the TECH223783 and I've copied the files it says to into that folder. Any ideas?
Articles related to Symantec Endpoint Encryption.
Thanks a lot.
Can you brief about which kind of Articles you need/Looking for.?
I am more than happy to help you.
Hi Hardeepshinsh Amazing work man. These are very useful. Do you have any more articles regarding Symantec Endpoint Encryption that you would like to share? Thanks and Regards
You could try clean installation then.
This was the only error I've gotten in the process of creating the PE CD.
Unfortunately this is the only test PC I have to try and create this on for the time being.
Hi Average Joe,
I think there should be some error in Installation of Deployment and Imaging Wizard.
did you try the same in any other system.?
Regards,
Hardeepsinh
I followed the TECH223783 guide originally and got the same results.
This wasn't updated for 11.1.0. From the 11.1.0 guide:
From a computer running Drive Encryption, copy the following files and transfer them to the c:\eede folder on a computer installed with Windows ADK. ■ C:\Program Files\Symantec\Endpoint Encryption Clients\Drive Encryption\* ■ %SYSTEMROOT%\system32\drivers\eed*.sys ■ %SYSTEMROOT%\system32\shfolder.dll ■ %SYSTEMROOT%\system32\drivers\PGPce.*
Note: The PGPce files are available only on Windows systems running Symantec Endpoint Encryption 11.1.0 or later.
https://support.symantec.com/en_US/article.TECH223783.html has the official technote/guide.
Whenever I run the 'eedpe.bat winpe.wim c:\eede' command in step 5 I keep getting this error message:
"ERROR!!! C:\eede is missing some critical program files needed for recovery"
I've gone through from the beginning a few times with the same result. Any idea what I could be doing wrong?