How to use Ghost to take and deploy images to iGel Thin Clients

Due to limited memory, installing a Ghost client on these devices will fail. 1-click virtual partition boot media tends to fail, as well. Here is a method to backup and restore to an iGel Thin Client:

1. Create a Standard Ghost Boot Package using PC-DOS on a USB flash drive.

2. Boot to that device; the boot order will need to be changed to allow booting to that device.

3. Choose Local > Disk > To Image to backup, or choose Local > Disk > From Image to restore.

Note: The USB flash drive used will need to be large enough to accomodate the Ghost boot package and the image.