I have had issues with the HP Elitebook 8530P machines and I wanted to share the resolution I found: To resolve this issue, you will need to use Windows PE as the PreOS, add the latest driver for the Intel card and add some disk access command line switches. 1. Go to Intel's website and download the Windows Vista driver for the Intel 82567LM-3 network card: http://downloadcenter.intel.com/filter_results.aspx?strTypes=all&ProductID=3003&OSFullName=Windows+Vista*+Ultimate%2C+32-bit+version&lang=eng&strOSs=156&submit=Go 2. Extract that driver via these instructions: How to extract 32-bit Network Interface Card (NIC) drivers without installing them to the local system http://service1.symantec.com/SUPPORT/on-technology.nsf/docid/2008081107094760 3. Import the drivers through the Ghost Boot Wizard: How to add drivers to DeployAnywhere or WinPE. http://service1.symantec.com/SUPPORT/on-technology.nsf/docid/2008050916132860 If using the Ghost Console:
To resolve this issue, you will need to use Windows PE as the PreOS, add the latest driver for the Intel card and add some disk access command line switches.
1. Go to Intel's website and download the Windows Vista driver for the Intel 82567LM-3 network card:
http://downloadcenter.intel.com/filter_results.aspx?strTypes=all&ProductID=3003&OSFullName=Windows+Vista*+Ultimate%2C+32-bit+version&lang=eng&strOSs=156&submit=Go
2. Extract that driver via these instructions:
How to extract 32-bit Network Interface Card (NIC) drivers without installing them to the local system
http://service1.symantec.com/SUPPORT/on-technology.nsf/docid/2008081107094760
3. Import the drivers through the Ghost Boot Wizard:
How to add drivers to DeployAnywhere or WinPE.
http://service1.symantec.com/SUPPORT/on-technology.nsf/docid/2008050916132860
If using the Ghost Console:
1. Right-click the entry for the machine in the Default Machine Group. On the Client tab, make sure that the Virtual Partition PreOS is set to winpe (this should be the same build of Windows PE that you added the driver to).
2. Add the following switches to the task via the Advanced button (on the Clone tab in a Clone task, or the General tab in an Imge Create Task):
-FNI -NOIDE
If using boot media:
1. Recreate boot media with the following switches in the Parameters line:
2. Use that boot media for Local or Ghostcast task.
Hi Randall,
Thanks to share you’re finding with other people.
I’ve been following the steps but when I boot and then select Unicast broadcast for some reason I’m always getting my loop back address ( 127.0.0.1) I should received an IP from my DHCP server.
Any ideal, I’m usignElitebook 8440 and added to the WinPE the vista driver
Thanks