VSS Fix.bat
Created: 23 Aug 2012 | Updated: 21 May 2013 | 11 comments
"VSS FIX" (tested) only for 2008 and 2008R2 servers.
* Copy the below commands in the same format to a notepad and save it as .bat file. Run this bat file to fix VSS writer issues. Requires elevation.
* This bat file re-register all the VSS dlls.
* Will work on Windows 2008 and Windows 2008 R2 servers.
* After this, Run command VSSADMIN LIST WRITERS
* Check if System writer is listed. If System writer is not listed run the next set of commands.
net stop "System Event Notification Service"
net stop "Background Intelligent Transfer Service"
net stop "COM+ Event System"
net stop "Microsoft Software Shadow Copy Provider"
net stop "Volume Shadow Copy"
cd /d %windir%\system32
net stop vss
net stop swprv
regsvr32 /s ATL.DLL
regsvr32 /s comsvcs.DLL
regsvr32 /s credui.DLL
regsvr32 /s CRYPTNET.DLL
regsvr32 /s CRYPTUI.DLL
regsvr32 /s dhcpqec.DLL
regsvr32 /s dssenh.DLL
regsvr32 /s eapqec.DLL
regsvr32 /s esscli.DLL
regsvr32 /s FastProx.DLL
regsvr32 /s FirewallAPI.DLL
regsvr32 /s kmsvc.DLL
regsvr32 /s lsmproxy.DLL
regsvr32 /s MSCTF.DLL
regsvr32 /s msi.DLL
regsvr32 /s msxml3.DLL
regsvr32 /s ncprov.DLL
regsvr32 /s ole32.DLL
regsvr32 /s OLEACC.DLL
regsvr32 /s OLEAUT32.DLL
regsvr32 /s PROPSYS.DLL
regsvr32 /s QAgent.DLL
regsvr32 /s qagentrt.DLL
regsvr32 /s QUtil.DLL
regsvr32 /s raschap.DLL
regsvr32 /s RASQEC.DLL
regsvr32 /s rastls.DLL
regsvr32 /s repdrvfs.DLL
regsvr32 /s RPCRT4.DLL
regsvr32 /s rsaenh.DLL
regsvr32 /s SHELL32.DLL
regsvr32 /s shsvcs.DLL
regsvr32 /s /i swprv.DLL
regsvr32 /s tschannel.DLL
regsvr32 /s USERENV.DLL
regsvr32 /s vss_ps.DLL
regsvr32 /s wbemcons.DLL
regsvr32 /s wbemcore.DLL
regsvr32 /s wbemess.DLL
regsvr32 /s wbemsvc.DLL
regsvr32 /s WINHTTP.DLL
regsvr32 /s WINTRUST.DLL
regsvr32 /s wmiprvsd.DLL
regsvr32 /s wmisvc.DLL
regsvr32 /s wmiutils.DLL
regsvr32 /s wuaueng.DLL
sfc /SCANFILE=%windir%\system32\catsrv.DLL
sfc /SCANFILE=%windir%\system32\catsrvut.DLL
sfc /SCANFILE=%windir%\system32\CLBCatQ.DLL
net start "COM+ Event System"
net stop "Background Intelligent Transfer Service"
net stop "COM+ Event System"
net stop "Microsoft Software Shadow Copy Provider"
net stop "Volume Shadow Copy"
cd /d %windir%\system32
net stop vss
net stop swprv
regsvr32 /s ATL.DLL
regsvr32 /s comsvcs.DLL
regsvr32 /s credui.DLL
regsvr32 /s CRYPTNET.DLL
regsvr32 /s CRYPTUI.DLL
regsvr32 /s dhcpqec.DLL
regsvr32 /s dssenh.DLL
regsvr32 /s eapqec.DLL
regsvr32 /s esscli.DLL
regsvr32 /s FastProx.DLL
regsvr32 /s FirewallAPI.DLL
regsvr32 /s kmsvc.DLL
regsvr32 /s lsmproxy.DLL
regsvr32 /s MSCTF.DLL
regsvr32 /s msi.DLL
regsvr32 /s msxml3.DLL
regsvr32 /s ncprov.DLL
regsvr32 /s ole32.DLL
regsvr32 /s OLEACC.DLL
regsvr32 /s OLEAUT32.DLL
regsvr32 /s PROPSYS.DLL
regsvr32 /s QAgent.DLL
regsvr32 /s qagentrt.DLL
regsvr32 /s QUtil.DLL
regsvr32 /s raschap.DLL
regsvr32 /s RASQEC.DLL
regsvr32 /s rastls.DLL
regsvr32 /s repdrvfs.DLL
regsvr32 /s RPCRT4.DLL
regsvr32 /s rsaenh.DLL
regsvr32 /s SHELL32.DLL
regsvr32 /s shsvcs.DLL
regsvr32 /s /i swprv.DLL
regsvr32 /s tschannel.DLL
regsvr32 /s USERENV.DLL
regsvr32 /s vss_ps.DLL
regsvr32 /s wbemcons.DLL
regsvr32 /s wbemcore.DLL
regsvr32 /s wbemess.DLL
regsvr32 /s wbemsvc.DLL
regsvr32 /s WINHTTP.DLL
regsvr32 /s WINTRUST.DLL
regsvr32 /s wmiprvsd.DLL
regsvr32 /s wmisvc.DLL
regsvr32 /s wmiutils.DLL
regsvr32 /s wuaueng.DLL
sfc /SCANFILE=%windir%\system32\catsrv.DLL
sfc /SCANFILE=%windir%\system32\catsrvut.DLL
sfc /SCANFILE=%windir%\system32\CLBCatQ.DLL
net start "COM+ Event System"
-----------------------------------------------------------------------------------------------
If System writer is not listed when you check for the writers, run the below commands with elevated command prompt or can be created as a bat file :-
Takeown /f %windir%\winsxs\temp\PendingRenames /a
icacls %windir%\winsxs\temp\PendingRenames /grant "NT AUTHORITY\SYSTEM:(RX)"
icacls %windir%\winsxs\temp\PendingRenames /grant "NT Service\trustedinstaller:(F)"
icacls %windir%\winsxs\temp\PendingRenames /grant BUILTIN\Users:(RX)
Takeown /f %windir%\winsxs\filemaps\* /a
icacls %windir%\winsxs\filemaps\*.* /grant "NT AUTHORITY\SYSTEM:(RX)"
icacls %windir%\winsxs\filemaps\*.* /grant "NT Service\trustedinstaller:(F)"
icacls %windir%\winsxs\filemaps\*.* /grant BUILTIN\Users:(RX)
icacls %windir%\winsxs\temp\PendingRenames /grant "NT AUTHORITY\SYSTEM:(RX)"
icacls %windir%\winsxs\temp\PendingRenames /grant "NT Service\trustedinstaller:(F)"
icacls %windir%\winsxs\temp\PendingRenames /grant BUILTIN\Users:(RX)
Takeown /f %windir%\winsxs\filemaps\* /a
icacls %windir%\winsxs\filemaps\*.* /grant "NT AUTHORITY\SYSTEM:(RX)"
icacls %windir%\winsxs\filemaps\*.* /grant "NT Service\trustedinstaller:(F)"
icacls %windir%\winsxs\filemaps\*.* /grant BUILTIN\Users:(RX)
net stop cryptsvc
net start cryptsvc
net start cryptsvc
About Backup & Recovery Community Blog
The Backup and Recovery Community Blog is the perfect place to share short, timely insights including product tips, news and other information relevant to the Backup and Recovery community. Any authenticated Connect member can contribute to this blog.
Filter by:
Blog Tags
NetBackup Backup Exec 7.1.x and Earlier 2010 12.x Symantec System Recovery (formerly Backup Exec System Recovery) 2012 11.x 7.5 10.x and Earlier Tip/How to NetBackup Appliances Basics OpsCenter NetBackup PureDisk Best Practice Upgrade Agents BESR 8.x Features NetBackup BESR 2010 VMware BESR 7.x and Earlier Restore
Comments 11 Comments • Jump to latest comment
The VSS re-registration procedure has already been documented in
http://www.symantec.com/docs/TECH70486
But why is it mentioned that it is not for 2008 R2 servers ? I had tried this on Windows 2008 R2 servers as well and it does works.
As per Microsoft KB http://support.microsoft.com/kb/940184
Important This article is not for use with Windows Vista, with Windows Server 2008, or with later Windows operating systems. Starting with Windows Vista and with Windows Server 2008, Windows component installation is manifest-based. Trying to manually register specific components, as described in the following steps, can have unexpected results that may require you to reinstall Windows to resolve.
As such the steps in the TECH70486 and in this thread above should only be for Windows 2003 and not for Windows 2008. We have another technote which clearly suggests the same: http://www.symantec.com/docs/TECH173983
Note: I am in process of arranging for TECH70486 to be withdrawn
...plagiarism?
Alternative ways to access Backup Exec Technical Support:
https://www-secure.symantec.com/connect/blogs/alte...
I don't care how or why the VSS Fix bat post got here ~ it WORKS. I tried everything else everywhere else and even customer support at another vendor's site couldn't help me. I did all of the commands listed above through 2 bat files (first section of code and then the second section) and immediately my backups began working again and ALL PROBLEMS WERE SOLVED. This code listed IN THE POST works perfectly!
KKJJ - -What operating system did you use this on?
Andy Horlacher
Please mark this thread as 'solved' if it answers your question
I had to run it a little differently as follows:
I FINALLY GOT IT TO WORK:
Here's what I had to do: I did all this below THEN AFTER made sure the appassure service was running before I tried again (It was running before in all of my other tests) and tried and BAM! It started the copying FINALLY:
net stop "System Event Notification Service"
net stop "Background Intelligent Transfer Service"
net stop "COM+ Event System"
net stop "Microsoft Software Shadow Copy Provider"
net stop "Volume Shadow Copy"
cd /d %windir%\system32
net stop vss
net stop swprv
regsvr32 /s ATL.DLL
regsvr32 /s comsvcs.DLL
regsvr32 /s credui.DLL
regsvr32 /s CRYPTNET.DLL
regsvr32 /s CRYPTUI.DLL
regsvr32 /s dhcpqec.DLL
regsvr32 /s dssenh.DLL
regsvr32 /s eapqec.DLL
regsvr32 /s esscli.DLL
regsvr32 /s FastProx.DLL
regsvr32 /s FirewallAPI.DLL
regsvr32 /s kmsvc.DLL
regsvr32 /s lsmproxy.DLL
regsvr32 /s MSCTF.DLL
regsvr32 /s msi.DLL
regsvr32 /s msxml3.DLL
regsvr32 /s ncprov.DLL
regsvr32 /s ole32.DLL
regsvr32 /s OLEACC.DLL
regsvr32 /s OLEAUT32.DLL
regsvr32 /s PROPSYS.DLL
regsvr32 /s QAgent.DLL
regsvr32 /s qagentrt.DLL
regsvr32 /s QUtil.DLL
regsvr32 /s raschap.DLL
regsvr32 /s RASQEC.DLL
regsvr32 /s rastls.DLL
regsvr32 /s repdrvfs.DLL
regsvr32 /s RPCRT4.DLL
regsvr32 /s rsaenh.DLL
regsvr32 /s SHELL32.DLL
regsvr32 /s shsvcs.DLL
regsvr32 /s /i swprv.DLL
regsvr32 /s tschannel.DLL
regsvr32 /s USERENV.DLL
regsvr32 /s vss_ps.DLL
regsvr32 /s wbemcons.DLL
regsvr32 /s wbemcore.DLL
regsvr32 /s wbemess.DLL
regsvr32 /s wbemsvc.DLL
regsvr32 /s WINHTTP.DLL
regsvr32 /s WINTRUST.DLL
regsvr32 /s wmiprvsd.DLL
regsvr32 /s wmisvc.DLL
regsvr32 /s wmiutils.DLL
regsvr32 /s wuaueng.DLL
sfc /SCANFILE=%windir%\system32\catsrv.DLL
sfc /SCANFILE=%windir%\system32\catsrvut.DLL
sfc /SCANFILE=%windir%\system32\CLBCatQ.DLL
net start "COM+ Event System"
-----------------------------------------------------------------------------------------------
Next RUN THIS: I made a change in this code
Takeown /f %windir%\winsxs\temp\PendingRenames /a icacls %windir%\winsxs\temp\PendingRenames /grant "NT AUTHORITY\SYSTEM:(RX)"
icacls %windir%\winsxs\temp\PendingRenames /grant "NT Service\trustedinstaller:(F)"
icacls %windir%\winsxs\temp\PendingRenames /grant BUILTIN\Users:(RX)
Takeown /f %windir%\winsxs\filemaps\* /a icacls %windir%\winsxs\filemaps\*.* /grant "NT AUTHORITY\SYSTEM:(RX)"
icacls %windir%\winsxs\filemaps\*.* /grant "NT Service\trustedinstaller:(F)"
icacls %windir%\winsxs\filemaps\*.* /grant BUILTIN\Users:(RX)
net stop cryptsvc
net start cryptsvc
I ran it on Server 2008 R2 standard...but I did change the code a little bit see my other email
Some say you can run this on Server 2008 R2 and some say you can't....Anup1304 says he ran it successfully....Andy H...was the OS you ran this on 2008 R2?? Thanks.
I've run it on plenty of Win2K8 R2 servers and never had an issue with them. You might and it ends up breaking something as per the TN.
Something like that has obviously happened and MS/Symantec have since changed the stance on running this fix. In this case, if you do and it works, great...if you do an it breaks something, they're covered by what is in the TN.
This is why you won't be advised to do so (by any self-respecting person on the forums)...
Thanks!
Alternative ways to access Backup Exec Technical Support:
https://www-secure.symantec.com/connect/blogs/alte...
HI - sorry it took so long to get back with you.
I ran it on Server 2008 R2 standard.
Would you like to reply?
Login or Register to post your comment.