Screencasts - Hilfsvideos

Altiris 6.8 Build 378 SP2 - Won't Image properly

Created: 03 Dez. 2013 • Aktualisiert: 03 Dez. 2013 | 2 Kommentare

I currently run Altiris 6.8 Build 378 SP2 on a Windows Server 2003 OS - Everything works currently from pushing of jobs, to remoting into PCs ect... However I can't image for some reason, when I image a PC everything seems to work as per the norm from start to finish, Name selection, Job Selection then the 0-100% bar appears and images fine. However when the image hits 100% and is booting to production 1 of 2 things occur. It'll either boot just fine but all the existing components on the PC are still there as if it didn't in fact image despite it going through the process completely or the PC won't boot, and I'll be prompted to uninstall any new software/hardware I've put on the machine.

I feel I've searched around a bit and tried a few things however nothing I try seems to resolve this issue, any assistance would be grateful!

Thanks in advance,


Operating Systems:

Kommentare KommentareZum neuesten Kommentar

das Bild der HighTowers

Are you sure the image is actually installing on your hard drive?  Is it possible that you have some other storage attached and the image is actually applying to that instead?

das Bild der HighTowers

And, is there any reason why you're still on DS 6.8?  You're literally at least 10 versions behind current.