Screencasts - Hilfsvideos

booting from dos, computer hangs on aname.exe

Created: 26 Nov. 2012 | 3 Kommentare

Using a dos boot disk created from Altiris deployment solution. I have one computer that hangs on the aname.exe command. The network adapter is a gigbit Intel adapter.

Any suggestions on where to start troubleshooting this?



Kommentare KommentareZum neuesten Kommentar

das Bild der andykn101s

Is it definitely the aname command it stalls at? I've never seen that before.

Have you been able to determine if it's that model of adapter that's causing the problem? If so about the only thing you could try and do is adjust the settings in protocol.ini.

Authorised Symantec Consultant (ASC) with Endpoint Management Limited, an Authorised Symantec Delivery Provider based in the UK.

Connect Etiquette: Please "Mark as Solution" posts that fix your problem.

das Bild der jousterlys

Yes, i can take aname out and it connects to the network, but it doesnt change the computer name. We have several computers logging on for imaging so the name change is needed.

das Bild der Nelos

If this is happening for all your clients, try recreating the boot media. I remember an issue where this was an issue.