PC-DOS NIC Drivers for Intel as on 7/13/2010
The Ghost Solution Suite requires the PC-DOS drivers for use in the boot environment. The downloads from the Intel site, in addition to being difficult to locate, have incorrect instructions for extracting them without installing them in the ReadMe file. I have extracted these and created simple .ZIP files of these drivers. They may be added to the Ghost Boot Wizard according to these directions
Adding or modifying DOS NIC templates in the Ghost Boot Wizard
http://service1.symantec.com/SUPPORT/on-technology.nsf/docid/2000011211551725?Open&seg=ent
Make sure you select the NDIS 2 option and click on setup tab which automatically loads the drivers.
Don't click on browse and add the drivers which may not load the correct drivers.
Thanks
Sockkalingam
Comments
PC Dos for 82577LM
Hi ,
I want to configure Boot image (.Iso) with the ndis2 drivers (from your link) for 82577LM for an HP 8450W and it reboot contantly.
It detect mac adresse of my nic and so reboot
Please help me
solved.
I solved my problem.
this is the SATA mode AHCI that caused the reboot
Glad that your issue got resolved
Hi
Im glad that your issue got fixed.
Hope everything goes smooth now.
In case in future if you have any issue.
Feel free to call the Technical Support Team or update us in the forum
Thanks
Sockkalingam
Thanks,
Sockkalingam
If you feel your issue has been addressed to, please use the "Mark as Solution" link for the relevant thread.
How to Incorporate Into DS 6.5?
We are running the ancient version of the DS (6.5) with plans to upgrade next year. In the meantime, how do I incorporate the DOS drivers into my boot image for the Latitude E6510? I am using the same set of steps I have used for the last several years, but when it boots to the DOS image, I get an 'Error 7308: The driver file could not be found'. Please help!
Would you like to reply?
Login or Register to post your comment.