Early Access to the Inventory Solution 7.0 SP2 Windows 7 Readiness Reports

By Joel Smith | November 23, 2009 11:01AM
Do you want to know what systems are and are not ready for a Windows 7 migration? Two reports are to be included in Inventory Solution 7.0 SP2, but this release is still several months away as of the writing/posting of this article. Read full post
Endpoint Management & Virtualization Feed
RSS
Eugene Manko commented 23 min 13 sec ago on Imaging Windows 7 64 bit forum discussion You will need 64bit client but even then GSS 2.5 64bit client will probably tell you that version is ...
sheeeng commented 38 min 58 sec ago on Execute an EXE (contains 3rd party MSI) during Installation forum discussion Hi AngelD & EdT, Let me illustrate my situation. I know how to use Wise Installation Studio ...
Bob Crook posted a new forum discussion: IFSMSE management console shows new version available but clicking on link reveals nothing 47 min 25 sec ago
I have been able to download from file connect the latest version of IFSMSE so how do I upgrade?  Just run the new version?
Fede commented 4 hours 16 min ago on Recovery Solution 7.0 Home Page question forum discussion Does anyone can tell is this product is still selling, I suppose is replace by Backup Exec System ...
Joolwee posted a new forum discussion: Is Mini Help Desk useful for semantic? 5 hours 57 min ago
Hi, I am using a widget to add a Mini Help Desk for my website: http://www.orderartwork.com
P.Luecking posted a new forum discussion: HP DC 7900 PXE x64 DHCP Problems 10 hours 4 min ago
Hi guys, I've tried to build a new PXE Image on the most current Deployment Solution. X86 image works fine. The PC gets the DHCP adress. With the x64 pxe envirement it doesn't work. I think it's a driver problem. The DHCP service restarts over and over again. The DC 7800 works fine with x64. Does anyone have an idea ?
Rivin posted a new forum discussion: MessageBox 10 hours 47 min ago
Hi guys. I need to display the message at the very beginning of the install in case if there is some third party application is installed, then to ask user if he want to go back and uninstall this or just cancel this error mesage and comtinue. I was trying to run VScript from Embedded Code after the CostInitialize in User Interface, but it always returm me an error 1720
CMPOB posted a new forum discussion: Adding Computers 11 hours 29 min ago
I am adding an additional computer (server) to a backup regime using Backup Exec System Recovery 8.5 I have deployed the agent and set up a new backup job which points to the same share (DAS drive) that the local server backs up to. I can run the job, but it dies immediately with the following error.
Teryus posted a new forum discussion: How enable F2 BootWorks Diagnostic Utility in my RDP 11 hours 37 min ago
Well, god morning That is the question How enable F2 BootWorks Diagnostic Utility in my RDP Why ?, because i send a job for WINPE o LINUXPE or DOS (DOS failed but other reasons) and i dont see in the screen the option to push F2 and enter to mode Diagnostics Utility Please any idea
denstill posted a new forum discussion: client will not connect to ghostcast 13 hours 5 min ago
I am currentl trying to set up a baseline shop that runs off of lan boot for my clients. I am using symantec ghost 11.0.1. I have com to a wall with the lan boot setup. I am able to boot ghost on the client PC but right before it works the screen freezes and a black bar runs across the top of the screen with white random letters and symbols in it.
Bengaul posted a new forum discussion: Imaging Windows 7 64 bit 14 hours 29 min ago
Hi there, Does anyone know how I might go about imaging a 64 bit version of Windows 7 Enterprise? We currently have GSS 11.5 running on a 32bit XP machine. The Win 7 machine did not like the client for a start, and do I need a new sysprep version? Many thanks, Ben
cingram posted a new idea: Feature Selection in MSI install 15 hours 48 min ago
I would like to see the selection tree have the ability to show check marks for the individual features for the installation. It can make installers aimed at low level users easier to comprehend. Microsoft  does this with their Visual Studio installs.
JBERRET posted a new forum discussion: error 5 when using drive mapping boot package 16 hours 19 min ago
Hi everybodies, I just came back from SYMANTEC GSS2.5 Training session, I recreated the lab environement with VMWARE WORSTATION 6.5, so: 1 DC w2k3 R2SP2 (DNS,WINS,AD) 1 GHOSTSERVER w2k3 R2SP2 (GSS,DHCP,3COM TFTP,3COM PXE) 2 clients XPSP2 First I wanted to test drive mapping boot package.
Jonathan L posted a new forum discussion: Storage Management 17 hours 46 min ago
As I'm down to the last 50GB (7.5%) of storage space I'm going through a task to clean up data. I've added some addition global exclusions, and I've changed the values to keep snapshots for 15 days, deleted files for 90 days, and only keep 3 days worth of revision history of PST files.
Katrien posted a new forum discussion: Running SQL script when REMOVE/Uninstall 18 hours 14 min ago
Hi, Apologies if this question has been posed previously, I cannot find it via "Search" but simply point me to the solution if so ... I am desparately looking for a solution for the following problem. 1. In the Install I run a few SQL Scripts that create a database
sheeeng posted a new forum discussion: Execute an EXE (contains 3rd party MSI) during Installation 19 hours 20 min ago
Hi, I'm using Wise Installation Studio 7.0. How do I execute a 3rd party EXE file which contains 3rd party MSI during installation using Wise Installation Studio? For uninstallation, how to I call the 3rd party EXE file with /X (MSIEXEC Uninstall Command Switch) to uninstall all the related files installed by it?
GillB posted a new forum discussion: Reconfiguring existing clients 19 hours 37 min ago
Is it possible to reconfigure clients to point to a different SEPM on an entirely different domain, or do they need to be reinstalled? With previous versions I was able to use the grc.dat to easily move clients about - is there an equivalent file with SEP? Thanks in advance Gill
ash1010 posted a new forum discussion: Altiris error - unable to boot to automation 21 hours 11 min ago
Hi I am trying to deploy windows 2003 to hp proliant 360 using the deploy proliant ml/dl/bl windows 2003 + PSP - WINPE (built in job)